It checks today's price at every store, compares the alternatives and answers in about a minute.
The WoodRiver Snap-Set is a miter gauge and fence combo for table saws and router tables. Its spring-loaded plunger snaps into machined holes for 13 positive stops at 0°, 22.5°, 30°, 45°, 60°, 67.5° and 90° in both directions, and a large clamping knob locks any angle in between. The 17-1/2-inch anodized aluminum fence carries an adjustable flip-stop for repeatable cuts and slides along the head for calibration, held by two thumb screws. The miter bar uses spring-loaded rollers to stay tight against one side of a standard 3/4-inch by 3/8-inch slot, with a T-slot washer for wider crosscuts. It suits woodworkers who want fast, repeatable miter and crosscut settings without an aftermarket gauge's price, though it is a shop-made-grade accessory rather than a precision incra-style system.
In stockReturn policy
Owners of this style of gauge praise the snap-in stops for speed and repeatability and the flip-stop for batch cutoffs. Some find the in-between angle setting less precise than a gauge with a fine adjuster, and the short fence limits wide work.
The Snap-Set Miter Gauge & Fence Combo is a pivoting miter gauge with an attached fence for crosscutting and miter cuts on a table saw, and for routing end grain or miters on a router table. The gauge head is made from steel plate and has 13 positive stops: 0°, 22-1/2°, 30°, 45°, 60°, 67-1/2° and 90°, in both directions.
The stops are set with a spring-loaded plunger that snaps into machined holes, and any angle between 0° and 90° can be set with the large clamping knob. The 17-1/2" fence is made of anodized aluminum alloy and slides along the miter gauge head, where two thumb screws hold it true. An adjustable flip-stop rides along the fence for repeatable cuts.
The miter bar uses spring-loaded rollers that keep it tight against one side of a standard 3/4" x 3/8" miter slot. A T-slot washer is included for wider crosscut operations.