58% under what the other stores charge
Compared across 12 stores. Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
Southwire 10/2 UF-B is a two-conductor copper cable with a bare ground, built for direct burial and wet locations. The conductors are 10 AWG, rated 600 V, and the jacket is sunlight- and moisture-resistant, so it can run underground to outbuildings, post lamps, pumps and well equipment without conduit. It is stiffer and harder to bend than indoor NM-B, and 10-gauge copper is heavier and costlier than 12- or 14-gauge, but it carries more current over long runs. Electricians use it for feeder and branch circuits where the run leaves the building or sits in damp ground.
In stock
In stock
In stock
In stockReturn policy
In stock
Availability unknown
Availability unknown
Availability unknown
Availability unknown
As an Amazon Associate, Deal.ai earns from qualifying purchases.
Availability unknown
Availability unknown
Availability unknown
Store links may earn us a commission.
Lowest price we've seen: $59.16 on Nov 12 at Grainger Industrial Supply. Tracked across 11 stores since Nov 12.
Owners and electricians describe it as standard, dependable UF-B that does what direct-burial cable should. They note the stiffness and weight as the main drawbacks, and some mention jacket and stripping difficulties.
This is 100 ft. of Southwire 10/2 UF-B underground feeder cable with ground. It has copper conductors and a 600 V voltage rating.
UF-B cable can be used underground, including direct burial. It is generally used as a feeder to outside post lamps, pumps and other loads or apparatus fed from a distribution point in an existing building, as specified in the 2011 National Electrical Code.
Multiple conductor UF-B cable can also be used for interior branch circuit wiring in residential or agricultural buildings. Conductor temperatures must not exceed 90 deg C, and ampacity is limited to that for 60 deg C conductors. UF-B can be used in applications permitted for NMC in Section 334.10(B) of the National Electrical Code.
