- What is THHN wire used for?
- THHN is single-conductor building wire for branch circuits, run inside conduit in dry and damp locations. It is common in commercial lighting and receptacle circuits and in residential conduit work.
- Can I use 14/1 THHN for a 20-amp circuit?
- No. 14 AWG copper is limited to 15-amp circuits. Use 12 AWG for 20-amp circuits.
- Do I need conduit for this wire?
- Yes. It is a single bare conductor with no outer jacket, so it must run in conduit or raceway. It is not a substitute for sheathed cable in open walls.
- How is it different from 14/2 NM cable?
- NM cable bundles conductors in a jacket for direct runs through framing. This is one conductor for conduit work, with higher heat-rated insulation and no ground or neutral bundled in.
- Is solid wire harder to work with than stranded?
- Solid wire holds shape and takes screws well, but it is stiffer and harder to bend in tight boxes. Stranded is easier for tight pulls and vibration.
- What is in the box?
- One 500 ft coil or spool of 14 AWG solid copper THHN wire. No connectors, conduit or fittings are included.
- Where is the Southwire 500 ft. 14/1 Solid THHN Building Wire cheapest?
- At eBay, for $24.99, 75% under what the other stores charge, as of our latest check.
- Where can I buy the Southwire 500 ft. 14/1 Solid THHN Building Wire?
- 8 stores we checked sell it, including Amazon, eBay, ImperialSupplies.com, Parts Town, Blain's Farm & Fleet.