The Sanwa SP20 is a portable analog multimeter with 20 measurement ranges, intended for low-power circuits and home electric appliance testing. It measures DC and AC voltage, DC current, resistance up to 2 MΩ and capacitance, and it has a battery check range. With separately available probes it also reads DC high voltage up to 25 kV and temperature from -20 to 200 °C.
The meter uses an internal magnet, taut-band movement with a full-scale accuracy of 3%. A protective covering shields it against drop shocks, and a built-in glass fuse protects the circuit. A tilt stand holds the meter at an angle for reading.
It runs on two R6P (AA) 1.5 V batteries. The box contains the meter, one set of test leads and an instruction manual.
- Type
- Portable analog multimeter, internal magnet taut-band meter
- Functions
- 20 measurement ranges
- DCV
- 0.25/2.5/5/10/50/100 V (20 kΩ/V), 500 V (9 kΩ/V)
- ACV
- 10/50/250/500 V (9 kΩ/V)
- DCA
- 50 µA/2.5 mA/25 mA/0.25 A
- Resistance
- 2 kΩ/20 kΩ/200 kΩ/2 MΩ
- Capacitance
- 500 µF (approximate value)
- DC high voltage
- Up to 25 kV with separately available HV-10 probe, ±20% with probe
- Temperature
- -20 to 200 °C with separately available T-THP probe, ±3% with T-THP
- Battery check
- 1.5 V (1.0–2.0 V), approximate value
- Accuracy
- ±3% of full scale (resistance ±3% of arc)
- Frequency response
- AC 10 V range, 40 Hz to 100 kHz, within ±3%
- Battery
- 2 x R6P (AA) 1.5 V
- Fuse
- F0305 glass, 6.3 x 30 mm, 0.5 A/250 V, 300 A
- Dimensions
- H 144 x W 99 x D 41 mm
- Weight
- Approx. 270 g
- In the box
- Meter, one set of test leads, instruction manual
- Other
- Drop shock proof, tilt stand