

Prices are checked against each store and labelled with when.
SPEEDWOW coilovers for the 2013–2019 Toyota Yaris are a twin-tube adjustable suspension kit with separate ride-height adjustment that does not change spring preload. They add adjustable rebound damping, cold-bent 55CrSi springs, CNC aluminum top mounts and, on some vehicles, camber plates. That is more tuning range than most fixed-height lowering spring kits, though it is a budget brand rather than a track-proven name. They suit Yaris owners who want stance and adjustable damping on a tight budget and are willing to accept a firmer ride and a setup session.
In stockSold by SPEEDWOWReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
The SPEEDWOW Coilover is a coilover kit for the 2013-2019 Toyota Yaris. It has adjustable rebound damping and separate height adjustment that does not change the preload. Some vehicles also get an adjustable camber plate. The dampers use a twin-tube design, and the kit is meant to let you tune the suspension for street and track driving.
The coil springs are cold-bent 55CrSi steel, stress-tested over 600,000 times with low distortion. Top mounts and lockers are CNC machined aluminum, and the lower mounts are heavy-duty steel. The damper oil has a high viscosity index so damping stays stable across a wide temperature range. Parts are anodized aluminum and powder-coated carbon steel with a matte finish, and the inserts come with long rubber boots to protect the damper. Each part is tested before assembly, and the kit is assembled in a clean room.
Installation must be done by a licensed mechanic and must follow local modification regulations. Tighten all components to the torque specifications in the vehicle service manual before and after installation; loose nuts, bolts or locks will cause noise. Do not use an impact wrench during installation, as it can loosen or damage the product. Check the clearance between the tires and the suspension: the minimum clearance is 4 mm, otherwise wheel spacers are needed. The kit is not sufficient with torsion beam trailing arm axles. Spray the coilover with WD40 every 3-4 months to keep it smooth and clean.
It checks today's price at every store, compares the alternatives and answers in about a minute.








