
Sperry Instruments HGT6520, Stop Shock II-Single, DIY Testing-120V AC, 3 Color LED Indicator, Comfort Grip, Patented GFCI Outlet Tester, Yellow
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
The Sperry Stop Shock II is a plug-in tester for standard three-prong 120V AC receptacles. It checks GFCI outlets and reports wiring faults through a three-color LED readout: correct wiring, bad ground, open neutral, hot/ground reverse, hot/neutral reverse and open hot. Its advanced circuitry detects low resistance on the ground wire, which basic two-lamp testers often miss. The ABS housing is rated to survive a 10-foot drop and 250 lb of crush force, so it holds up in a toolbox. It suits DIYers and homeowners checking outlets before a project; electricians usually want a tester that also reads voltage and trips GFCIs remotely.
In stockSold by Supply the HomeReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
The Stop Shock II is a GFCI receptacle tester that plugs into a 3-prong outlet and reports the wiring status on a 3-color LED readout. It is built for checking ground fault circuit interrupter receptacles and the wiring that feeds them. The tester has a yellow body with a comfort grip.
The housing is high-impact ABS with a 250 lb crush rating, and it withstands drops of up to 10 ft. A 360-degree LED indicator light stays visible from any angle, and advanced ground testing circuitry checks for the low resistance a ground wire should have.
The LED readout shows correct wiring or names the error it finds: bad ground, open neutral, hot/GND reverse, hot/NEU reverse, or open hot.
It checks today's price at every store, compares the alternatives and answers in about a minute.