The Spritech TW03 is a PCP air compressor for filling air guns, air rifles and paintball cylinders at home or in the field. It runs on a 12V car battery or on 110V AC through the included power converter. The maximum inflation pressure is 30 MPa (4500 PSI), and the recommended cylinder volume is up to 0.8L (800cc).
It needs no cooling water and no added oil. A built-in high-power side fan and multiple vents in the shell dissipate heat. A temperature display shows the internal temperature. When it reaches 80 degrees, stop filling and restart after the compressor cools down. A bursting disc is included for safety, and an oil-moisture filter at one end of the hose helps keep oil and moisture out of your air gun or air tank.
Both ends of the hose have 8mm FOSTER female quick-disconnect connectors. They fit the male nozzles of most PCP air rifles and paintball cylinders. The converter's input voltage is preset to 110V and its ports are already connected. The compressor weighs 5.5 kg, and its top is only slightly larger than an open palm.
- Model
- TW03
- Rated power
- 250W
- Power source
- 12V car battery, or 110V AC with the included power converter
- Max pressure
- 30 MPa / 4500 PSI
- Cylinder volume
- Recommended up to 0.8L (800cc)
- Fill speed
- 500cc tank: about 8 minutes from 200 to 300 bar; about 20 minutes from 0 to 300 bar
- Duty cycle
- 25 minutes of continuous inflation, then 10 minutes of rest
- Connectors
- 8mm FOSTER female quick-disconnect at both ends of the hose
- Hose rating
- Withstands 60 MPa
- Cooling
- Built-in side fan and shell vents; no water or oil needed
- Safety
- Bursting disc, temperature display, oil-moisture filter
- Net weight
- 5.5 kg
- Package size
- 11.8 x 10.0 x 9.2 inches
- Warranty
- One year