Stainless Steel 3-Way CB Mount
Best price now
Prices are checked against each store and labelled with when.
Ask our agent about this product
It checks today's price at every store, compares the alternatives and answers in about a minute.
Price facts
- Last seen at $24.95 at Right Channel Radios on Nov 10.
Our take on the Stainless Steel 3-Way CB Mount
A stainless steel bracket that holds a CB antenna three ways: clamped to a horizontal or vertical bar, or bolted flat to a surface once the back plate is removed. It includes a SO239 stud that mates with a PL-259 coax connector, so most standard CB antennas thread straight on. The bar clamp fits horizontal mirror arms and bars from .25 to 1 inch in diameter. It suits drivers who have not settled on a mounting spot, since one bracket covers bar, rail and flat-surface setups; dedicated L-brackets and mirror mounts do one job each and often cost less, but this one adapts.
- Three mounting options in one bracket
- Stainless steel resists rust and weather
- Includes a SO239 stud for PL-259 coax
- Clamp covers bars from .25 to 1 inch
- Back plate allows no-drill flat mounting
- Bar clamp tops out at 1 inch, so thicker tubes need another mount
- No coax, antenna or hardware beyond the stud included
- Flat-surface mounting still needs drilling once the plate is off
- Stainless is heavier and pricier than plain steel brackets
Stainless Steel 3-Way CB Mount prices at every store
- Right Channel RadiosNew
In stockReturn policy
$24.95Checked Nov 10
About the Stainless Steel 3-Way CB Mount
This stainless steel mount holds a CB antenna in three ways. It clamps to a vertical or horizontal bar, or the clamp can be removed so the bracket bolts directly to a flat vertical surface. It can also be used as a standard "L" bracket and built into a bumper, a pickup truck bed rail or a similar structure.
The clamp has a single mirror groove and a four-bolt assembly. With the four-bolt assembly removed, the grooved side can be rotated to match the direction of the bar. To mount on a flat surface, remove the grooved side and bolt the flat side down. The back plate allows installation without drilling.
The mount fits bars and mirror arms from 1/4" to 1" in diameter. It is often attached to mirror arms, bumpers, roof racks or the sides of vehicles. A SO-239 antenna stud is included and mates with a PL-259 coax cable.
- Model
- JBC995SS
- Material
- Stainless steel bracket and hardware
- Width
- 2"
- Bar diameter
- 1/4" to 1" (horizontal mirror arms or bars)
- Mount locations
- Mirror or bar, vertical surface or side mount, other
- Bolt pattern
- 4-bolt
- Stud type
- PL-259 (barrel); SO-239 stud
- Compatibility
- CB antennas with a standard 3/8" x 24 threaded base
- Coax requirement
- CB coax cable with PL-259 ends
- In the box
- Mount, mounting hardware and SO-239 stud
- Not included
- Antenna and coax
Questions and answers
- What does the 3-way mount attach to?
- A horizontal or vertical bar from .25 to 1 inch in diameter, or any flat surface with the back plate removed and the bracket bolted down. It is commonly used on mirror arms, roof racks, bumpers and bed rails.
- Does it fit my CB antenna?
- It includes a SO239 stud, the standard CB fitting, so any antenna with a PL-259 connector threads on. Check that your antenna's base matches that stud.
- Do I need to drill holes?
- For bar mounting, no: the clamp tightens around the bar. Flat-surface mounting with the back plate removed needs screws or bolts into the surface.
- Is it strong enough for a long antenna?
- Stainless steel holds up in weather, but a long whip on a thin mirror arm will flex. A heavier antenna is better on a bumper or bed rail than on a small bar.
- What is in the box?
- The stainless bracket with its back plate and bar clamp, plus the SO239 antenna stud. Coax cable and mounting screws are not included.
- Where is the Stainless Steel 3-Way CB Mount cheapest?
- At Right Channel Radios, for $24.95, as of our latest check.
- What do buyers say about the Stainless Steel 3-Way CB Mount?
- Rated 5 out of 5 from 1 ratings.
