This is a gravity-fed countertop water filtration system with brushed stainless steel upper and lower chambers. It uses carbon-infused Nano fiber filters to reduce contaminants such as sediment and chlorine. It comes in 2.4-gallon and 3.3-gallon sizes and includes a stainless steel spigot and a stainless steel stand. A rubber foot around the bottom chamber keeps it from slipping.
Each Nano filter is 2 1/2" x 7 1/2" with a 5-micron outer wrap. A new filter flows at about 12 gallons per hour, depending on how many contaminants are in the water. The filters are made in the USA. The filter holds 20 to 25 times more dirt and particulates than a mechanical (micron) filter and filters water up to 200 times faster. Use one filter at a time, and use only municipal tap water. Cleaner source water gives the filter a longer life.
- Material
- Brushed stainless steel canisters, stainless steel spigot and stand
- Capacity
- 2.4 gallons or 3.3 gallons
- Large size
- 23 1/2" H x 9 1/2" diameter, plus stand
- Medium size
- 19 1/2" H x 8 3/4" diameter, plus stand
- Large stand
- 6" H x 13" diameter
- Medium stand
- 6" H x 12 1/2" diameter
- Filter type
- Carbon-infused Nano fiber gravity flow filter, model NCA4520
- Filter size
- 2 1/2" x 7 1/2" with 5-micron outer wrap
- Flow rate
- About 12 gallons per hour per filter when new
- Certifications
- Certified by IAPMO R&T to NSF/ANSI 42 for material safety and NSF/ANSI/CAN 372 for low lead requirements
- Water source
- Municipal tap water only
- Origin
- Nano filters made in the USA
- In the box
- Nano filters (2 with 3.3 gallons, 1 with 2.4 gallons; use 1 at a time), silicone washers, wing nuts, 3 rubber plugs, stainless steel spigot, stainless steel stand