This is a rechargeable electric milk frother that stands upright in a suitable flat-bottomed container when its supporting sleeve is fitted. It comes with two interchangeable heads: a double-coil head for milk foam and a balloon whisk for mixing drinks. It has three speed settings.
To use it, fit the head and slide the sleeve over the shaft until it clicks. Fill a tall container, such as a measuring jug or milk pitcher, no more than halfway. Stand the frother upright with the whisk head fully under the milk and the motor housing above the liquid. Press and hold the button for 2 to 3 seconds until the indicator lights, and start on speed 1 or 2 to prevent overflow. Froth for 10 to 15 seconds, then switch off before lifting it out. The frother does not heat milk, so heat it separately for a hot drink.
The 1200 mAh battery recharges through the USB-C port. Do not run the frother while it is charging. Turn it off before swapping attachments. Rinse only the whisk head and sleeve, and let them dry completely. Wipe the motor housing with a soft, damp cloth and never submerge it. Keep the handle and charging port dry.
- Heads
- Double-coil head for milk foam, balloon whisk for mixing
- Speeds
- 3 settings
- Battery
- 1200 mAh, rechargeable
- Charging
- USB-C port, compatible USB-C cable
- Stand
- Supporting sleeve holds it upright in a flat-bottomed container
- Power on
- Press and hold the button for 2–3 seconds until the indicator lights
- Frothing time
- 10–15 seconds
- Fill level
- No more than half full
- Cleaning
- Rinse the whisk head and sleeve only; wipe the motor housing with a damp cloth