- What compressor do I need for this jack?
- It runs on shop air at 90 to 145 PSI and requires a 3 HP air compressor. A smaller compressor may not supply enough pressure to lift at full capacity.
- How high does it lift?
- The saddle goes from 9 inches without the adapter to 17-11/16 inches at full height. The stroke is 4-1/2 inches, and four saddle extensions of 20, 25, 60 and 100mm help reach different lift points.
- Will it fit under a low car?
- The minimum saddle height is 9 inches, which is too tall for most passenger cars. It is built for trucks, buses and heavy equipment with higher clearance.
- How is it different from a manual 20-ton bottle jack?
- It uses air pressure instead of manual pumping, so lifting is faster and less tiring. It also has a wider saddle range and rolls on 8-inch wheels.
- What is included with the jack?
- The jack comes with its handle and the four saddle extensions. An air compressor and air line are not included and are needed to operate it.
- Can it lift a fully loaded semi truck?
- Its rated capacity is 22 tons, or 44,000 lbs, which covers many loaded truck axles. Check the actual weight on the lift point before raising.
- Where is the STARK Jack Floor 22 Ton AIR cheapest?
- At Amazon, for $239.95, as of our latest check.
- Where can I buy the STARK Jack Floor 22 Ton AIR?
- 2 stores we checked sell it, including Colón Appliances / Pulguero Colón, Amazon.