StoreDeal.ai store
Shop
  • Deals
  • Deal checker
  • Black Friday
  • Buying guides
  • Brands
  • Stores
Travel
  • Flight deals
  • Hotel deals
Company
  • Research
  • Press
  • Use in AI assistants
  • Contact
  • deal.ai apps
Black Friday 2026
  • Walmart
  • Best Buy
  • Target
  • TVs
  • Laptops
  • Headphones
  • Apple
  • Gaming
  • Vacuums
  • Kitchen
  • Toys
  • Smartwatches
  • Tablets
  • Furniture
  • Mattresses
© Deal.ai Inc.·2222 Ponce de Leon Blvd, Miami, FL 33134·support@deal.ai
TermsPrivacy
Deal.ai
S
Stereo 3.7W Class D Audio Amplifier - MAX98306

Stereo 3.7W Class D Audio Amplifier - MAX98306

4.7(15 ratings)

Best price now

$9.53at The Pi HutChecked 3 h ago

Prices are checked against each store and labelled with when.

Finding cheaper alternatives

Checking the Deal.ai store…

Price facts

  • Lowest price today: $9.53 at The Pi Hut (checked Nov 20, 2026).
$9.53at The Pi HutChecked 3 h ago
Visit The Pi Hut

Our take on the Stereo 3.7W Class D Audio Amplifier - MAX98306

A tiny fully assembled breakout board built around the Maxim MAX98306 class D stereo amplifier chip. It delivers 2 x 3.7W into 3 ohm speakers and runs from 2.7V to 5.5V, so it suits battery-powered and portable audio projects. Class D efficiency above 90% into an 8 ohm load keeps heat low, and the board includes thermal and over-current protection. Against basic LM386 amps it is far more efficient and louder for its size, though its bridge-tied outputs mean it must drive speakers directly, not feed another amp.

Best forPortable and battery-powered audio buildsBreadboard prototyping with small speakersUpgrading an LM386-based projectMakers who want a pre-assembled amp board
Pros
  • Very small, fully assembled and tested board
  • 2 x 3.7W into 3 ohm speakers from a 2.7-5.5V supply
  • Class D efficiency over 90%, so it runs cool
  • Built-in thermal and over-current protection
  • Screw terminals, 2x4 header and gain jumper pre-soldered
  • Differential inputs with 1.0uF coupling capacitors
Cons
  • Speakers not included
  • Bridge-tied outputs cannot feed another amplifier
  • Best power needs 3 ohm speakers and a supply near 5V
  • Output is a 360kHz PWM square wave, not a line-level signal

Stereo 3.7W Class D Audio Amplifier - MAX98306 prices at every store

  • The Pi HutNew

    In stockShips from the UK · priced in GBP (£7.25) · duties may applyReturn policy

    $9.53Checked 3 h ago
    Visit The Pi Hut

What reviewers say

  • 4.7 / 515 ratings

Buyers rate it highly, with 15 ratings averaging 4.7 out of 5. Owners like its small size, easy setup and clean output for the power, and treat it as a clear step up from LM386 boards.

What people mention
  • SizePraisedOwners note how small the board is for the power it puts out.
  • SetupPraisedBuyers say the pre-soldered terminals and header make it quick to wire up.
  • HeatPraisedReviewers report the board stays cool even at high output.
  • OutputMixedThe bridge-tied output works well into speakers but cannot drive another amplifier.
  • SpeakersCriticisedBuyers point out that speakers are not included, so they must supply their own.

About the Stereo 3.7W Class D Audio Amplifier - MAX98306

This is a small stereo audio amplifier board built around the MAX98306 class D chip. It delivers 2 x 3.7 W into 3 Ω speakers and runs from 2.7 V to 5.5 VDC. The board measures 28.1 mm x 24.0 mm x 10.4 mm and weighs 4.6 g.

The inputs go through 1.0 µF capacitors, so they are fully differential; with a single-ended source, tie R- and L- to ground. The outputs are bridge-tied, connecting directly to the speakers with no ground connection. The output is a 360 kHz square-wave PWM that the speaker coil averages out, so the high frequencies are not heard. The output cannot drive another amplifier — it connects straight to speakers.

Gain is selectable in five steps — 6 dB, 9 dB, 12 dB, 15 dB and 18 dB — with a jumper or by setting the G and G' breakout pins. Thermal and short-circuit/over-current protection are built in, and click-and-pop suppression is included. The board comes fully assembled and tested, with pre-soldered 3.5 mm screw-terminal blocks and a 2x4 header, plus a header for breadboards and a gain jumper. Speakers are not included; use any speakers of 3 Ω or greater impedance.

Output Power
2 x 3.7 W at 3 Ω, 1.7 W at 8 Ω, 10% THD, 5 V supply
Supply Voltage
2.7 V to 5.5 VDC
Amplifier Class
Class D
Speaker Impedance
3 Ω or greater
Efficiency
Over 90% driving an 8 Ω speaker at over 1 W
Inputs
Differential, through 1.0 µF capacitors
Outputs
Bridge-tied, 360 kHz square-wave PWM
Gain
6 dB, 9 dB, 12 dB, 15 dB, 18 dB — jumper or G and G' pins
Protection
Thermal, short-circuit and over-current
Current Draw
2 mA quiescent, 10 µA in shutdown

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Enter to send, Shift+Enter for a new line

Questions and answers

What speakers work with this amp?
Use speakers of 3 ohm or higher; the board is rated for 2 x 3.7W into 3 ohm. Higher-impedance speakers work but deliver less power.
Can I connect its output to another amplifier?
No. The outputs are bridge-tied and carry a 360kHz PWM signal, so they must drive speakers directly.
What power supply does it need?
Anything from 2.7V to 5.5VDC. A supply near 5V gives the most output power.
How do I connect a normal single-ended source?
Tie the R- and L- inputs to ground. The 1.0uF input capacitors make the inputs differential.
What is in the box?
The assembled and tested breakout board with input capacitors, a breadboard header, pre-soldered 3.5mm screw terminals, a 2x4 header and a gain jumper. Speakers are not included.
Is it better than an LM386 amp?
Yes for efficiency and power in a small package. It runs cooler and louder, though it needs speakers wired directly rather than a line output.
Where is the Stereo 3.7W Class D Audio Amplifier - MAX98306 cheapest?
At The Pi Hut, for $9.53, as of our latest check.
What do buyers say about the Stereo 3.7W Class D Audio Amplifier - MAX98306?
Rated 4.7 out of 5 from 15 ratings.

More amplifiers

  • P
    Petyoung AK35 Bluetooth Amplifier - 30W×2 Stereo Receiver for Car/Home/Outdoor, 100W Peak, FM/USB/TF/AUX, Bass Treble Control
    Petyoung AK35 Bluetooth Amplifier - 30W×2 Stereo Receiver for Car/Home/Outdoor, 100W Peak, FM/USB/TF/AUX, Bass Treble Control
  • M
    Mini Digital HiFi Stereo Bluetooth 5.0 Power Amplifier Audio Receiver USB 50W+50W
    Mini Digital HiFi Stereo Bluetooth 5.0 Power Amplifier Audio Receiver USB 50W+50W
  • E
    EMiUZEK AMP D60
    EMiUZEK AMP D60
  • B
    BluAmp 150
    BluAmp 150
  • H
    HALO HINT6 Integrated Amp
    HALO HINT6 Integrated Amp
  • U
    Ubiquiti UPL-AMP-B-US UPL-Amp 2.1-Channel Integrated Amplifier with Wi-Fi (Black)
PSRR
83 dB at 217 Hz
EMI
Passes EMI limit unfiltered with up to 12 in (30 cm) of speaker cable
Dimensions
28.1 mm x 24.0 mm x 10.4 mm
Weight
4.6 g
In the Box
Assembled and tested breakout board, breadboard header, pre-soldered 3.5 mm screw-terminal blocks, pre-soldered 2x4 header, gain jumper
Not Included
Speakers
Silkscreen
Newer Pinguin version or older vector-font version; boards otherwise identical
Ubiquiti UPL-AMP-B-US UPL-Amp 2.1-Channel Integrated Amplifier with Wi-Fi (Black)
  • D
    Donner DKA-20 20W Amplifier
    Donner DKA-20 20W Amplifier
  • H
    Hi-Fi DAC Home Audio Amplifier - Bluetooth 5.2 400W, 2 Channel Class D, TPA3116 - JAMP79
    Hi-Fi DAC Home Audio Amplifier - Bluetooth 5.2 400W, 2 Channel Class D, TPA3116 - JAMP79