
StewMac Bearclaw Sitka Spruce Soundboard for Dreadnought Guitar
Last price we saw
Prices change often: ask the agent below to check today's price at every store.
Prices are checked against each store and labelled with when.
Price facts
- Last seen at $169.49 at Stewmac on Nov 18.
Our take on the StewMac Bearclaw Sitka Spruce Soundboard for Dreadnought Guitar
A bookmatched pair of quartersawn Sitka spruce soundboard halves sized for a dreadnought build. The draw is the bearclaw figure: a rare, irregular grain pattern that gives the finished top a distinctive look. Each half is about 8-1/2" x 21" and roughly 5/32" thick, unsanded, so you thickness it to your own target. Sawn from split billets to limit grain run-out, it suits builders who want a figured top and are set up to join, thickness and brace it themselves. Compared with plainer Sitka tops, you pay for appearance and grain discipline, not for a different species or a stiffer plate.
- Bearclaw figure gives a rare, distinctive look
- Quartersawn, bookmatched halves for a symmetrical top
- Split-billet sawing reduces grain run-out
- Large enough for a dreadnought when joined
- Left thick at about 5/32" so you control final thickness
StewMac Bearclaw Sitka Spruce Soundboard for Dreadnought Guitar prices at every store
- StewmacNew
Out of stock
$169.49Checked Nov 17
Store links may earn us a commission. Price via Klarna.
StewMac Bearclaw Sitka Spruce Soundboard for Dreadnought Guitar price history
Lowest price we've seen: $169.49 on Nov 11 at Stewmac. Tracked across 1 store since Nov 11.
From Stewmac
- Premium bearclaw grain gives a distinctive, rare appearance
- Bookmatched sets of two quartersawn halves
- When joined, large enough for a Dreadnought guitar
- Each half approximately 8-1/2" x 21" (216mm x 533mm)
- Unsanded tops approx. 5/32" (4mm) thick, ready for thickness-sanding to your specs
- Soundboards sawn from split billets to reduce grain run-out
- Materials
- Sitka spruce
- Fit
- Bookmatched sets of two quartersawn halves; when joined they're large enough for a Dreadnought guitar
- Sizing
- Each half is approximately 8-1/2" x 21" (216mm x 533mm); unsanded tops are approx. 5/32" (4mm) thick
- Shipping
- We Ship Worldwide! Ships Today if ordered within the stated cutoff
- In the box
- Bookmatched set of two quartersawn soundboard halves
About the StewMac Bearclaw Sitka Spruce Soundboard for Dreadnought Guitar
This is a bookmatched soundboard set for a Dreadnought acoustic guitar, sawn from Sitka spruce. The two halves are quartersawn and show a bearclaw grain figure.
The soundboards are cut from split billets to reduce grain run-out. Each half measures approximately 8-1/2" x 21" (216mm x 533mm), and when joined the pair is large enough for a Dreadnought guitar.
The tops come unsanded at approximately 5/32" (4mm) thick, ready for thickness-sanding to your own specs.
- Wood
- Sitka spruce
- Instrument size
- Dreadnought
- Grain
- Bearclaw figure
- Cut
- Quartersawn
- Set
- Bookmatched pair of two halves
- Dimensions per half
- Approx. 8-1/2" x 21" (216mm x 533mm)
- Thickness
- Approx. 5/32" (4mm), unsanded
- In the box
- Bookmatched set of two quartersawn soundboard halves
Ask our agent about this product
It checks today's price at every store, compares the alternatives and answers in about a minute.
Questions and answers
- Is this a finished guitar top?
- No. It is a bookmatched set of two spruce halves. You join them, thickness-sand to your target and brace them yourself.
- Will it fit a dreadnought?
- Yes. Each half is about 8-1/2" x 21", and joined they are large enough for a dreadnought soundboard.
- How thick is it out of the box?
- About 5/32" (4mm), unsanded. That leaves room to sand down to the thickness your build calls for.
- What is bearclaw?
- A grain figure in spruce that shows as irregular cross-grain marks. It is cosmetic and does not change the species.
- Why quartersawn and split-billet sawn?
- Quartersawn halves are stable and bookmatch cleanly. Sawing from split billets reduces grain run-out across the plate.
- What is in the box?
- One bookmatched set of two quartersawn soundboard halves. No bracing, rosette or other parts are included.








