How accurate is the SUKVPSI angle finder?

It states 0.2–0.5° accuracy with 0.05° resolution. That is fine for carpentry and general setup but not for precision metrology work.

Does it work on non-metal surfaces?

The magnets only hold on steel and other ferrous metal. On wood, drywall or aluminum you rest it against the surface or clamp it in place.

What do the dual lasers do?

They project alignment lines so you can line up a cut or a part without holding the tool against the reference edge.

Can it measure a full 360°?

Yes, it measures through a full 360° and toggles between angle and slope readout with one button.

What comes in the box?

One digital inclinometer. No case, batteries or accessories are listed, so check before you rely on it out of the box.

It carries an IP54 rating, which means dust-protected and resistant to splashes, not submersible.

SUKVPSI Digital Angle Finder & Gauge, Magnetic Dual Laser Inclinometer

Best price now

$11.76at WalmartChecked Nov 14

Prices are checked against each store and labelled with when.

Visit Walmart

SUKVPSI Digital Angle Finder & Gauge, Magnetic Dual Laser Inclinometer

Best price now

$11.76at WalmartChecked Nov 14

Prices are checked against each store and labelled with when.

Visit Walmart

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $11.76 at Walmart on Nov 14.

Our take on the SUKVPSI Digital Angle Finder & Gauge, Magnetic Dual Laser Inclinometer

The SUKVPSI Digital Angle Finder is a compact cube-shaped inclinometer with dual lasers, a backlit display and magnets on all four sides. It reads angles across a full 360° with 0.05° resolution and 0.2–0.5° accuracy, and it switches between angle and slope readout at the touch of a button. Its IP54 rating and 61×31×61 mm body suit woodworking, machining and renovation work where a hand-held level or a phone app is awkward. Against basic digital levels it adds laser alignment lines and stronger mounting; against premium inclinometers it trades some accuracy for a simpler, lighter tool.

Best forWoodworkers setting saw blades and miter anglesMachining and metal fabrication setupRenovation and installation work on metal framesAnyone who wants hands-free angle checks

Pros

Dual lasers mark alignment lines on the work
Magnets on all four sides hold it to steel hands-free
0.05° resolution and 0.2–0.5° accuracy
Backlit display readable in dim spaces
IP54 dust and splash resistance
Small and light at 61×31×61 mm

Cons

Accuracy of 0.2–0.5° is looser than premium inclinometers
No calibration or zeroing details given
Single-piece set with no case or batteries listed
Small display can be hard to read at odd angles

SUKVPSI Digital Angle Finder & Gauge, Magnetic Dual Laser Inclinometer prices at every store

WalmartNew
In stockSold by YushenheyuanReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
$11.76+ $3.26 shippingChecked Nov 14
Visit Walmart

About the SUKVPSI Digital Angle Finder & Gauge, Magnetic Dual Laser Inclinometer

The SUKVPSI Digital Angle Finder & Gauge is a magnetic dual-laser inclinometer. It measures through a full 360° with a resolution of 0.05° and an accuracy of 0.2-0.5°.

A digital display shows the reading, and one touch switches between angle and slope. An LED backlight keeps the display readable in low light. Lasers on both sides help with precise positioning.

Strong magnets on all four sides hold it to metal surfaces, which frees up your hands. It has an IP54 rating for dust and splash resistance, so it can be used in woodworking, machining and renovation work. The body is compact and lightweight.

Measuring range: 360°
Resolution: 0.05°
Accuracy: 0.2-0.5°
Display: Digital, with LED backlight
Modes: Angle and slope, switched with one touch
Lasers: Dual, on both sides
Mounting: Magnetic on all four sides
Protection: IP54 dust and splash resistant
Dimensions: 61 × 31 × 61 mm
Color: Black
In the box: 1 digital inclinometer

Specifications

color: BlackSource
size: 1pcsSource

Questions and answers

How accurate is the SUKVPSI angle finder?: It states 0.2–0.5° accuracy with 0.05° resolution. That is fine for carpentry and general setup but not for precision metrology work.
Does it work on non-metal surfaces?: The magnets only hold on steel and other ferrous metal. On wood, drywall or aluminum you rest it against the surface or clamp it in place.
What do the dual lasers do?: They project alignment lines so you can line up a cut or a part without holding the tool against the reference edge.
Can it measure a full 360°?: Yes, it measures through a full 360° and toggles between angle and slope readout with one button.
What comes in the box?: One digital inclinometer. No case, batteries or accessories are listed, so check before you rely on it out of the box.
Is it waterproof?: It carries an IP54 rating, which means dust-protected and resistant to splashes, not submersible.
Where is the SUKVPSI Digital Angle Finder & Gauge, Magnetic Dual Laser Inclinometer cheapest?: At Walmart, for $11.76, as of our latest check.