

Prices are checked against each store and labelled with when.
A five-piece bass package built around two Sundown Audio SA-12 V.3 D4 12-inch subwoofers, each rated 1500 watts RMS with dual 4-ohm voice coils. It adds a Rockville dBcomp4 mono amplifier (3000 watts RMS at 1 ohm, 2000 at 2 ohms at 14.4 volts), a 0-gauge copper wiring kit, a dual 12-inch vented MDF enclosure, and an enclosure install kit. The appeal is a matched system: subs, power, wiring and box chosen to work together instead of pieced together separately. It suits serious bass builds; the SA series is known for taking power and deep excursion, but it needs a strong electrical system and careful tuning.
In stockSold by AudiosavingsReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
Owners of the SA-12 V.3 line praise its output and power handling for the size, and the bundle is seen as a convenient way to get a matched system. Common complaints center on the electrical demands and the space the vented box takes.
This bundle is a five-item bass system built around two Sundown Audio SA-12 V.3 D4 12-inch subwoofers, each rated at 1500 watts RMS. It also includes the Rockville dBcomp4 mono amplifier, the RWK0CU 0 gauge copper amplifier installation kit, the RDVB12 dual 12-inch vented enclosure, and a dual subwoofer enclosure installation kit with wire, screws, and spade terminals.
Each SA-12 V.3 D4 subwoofer uses a dual 4 ohm voice coil, a 2.75 inch aluminum voice coil former, and high temperature copper winding. The motor has a vented magnetic gap, a solid pole piece with vent channels, a Magnet ID Faraday ring, and a pole cap Faraday ring, with 22mm of Xmax. The cone is competition grade paper on a foam surround, mounted in a custom tooled aluminum frame with multi layer spiders and stitched double XL tinsel leads.
The dBcomp4 amplifier delivers 3000 watts RMS at 1 ohm and 2000 watts RMS at 2 ohms at 14.4 volts, with adjustable low pass and subsonic filters, a bass remote, clip indicators, a voltage display, and protection circuitry. The RDVB12 enclosure is made of three quarter inch MDF with a dual 12 inch vented layout, 1.75 cubic feet net volume per sub, spring loaded terminals, and 39Hz tuning. The RWK0CU kit supplies 17 feet of 0 gauge power wire, 3 feet of ground wire, a remote lead, 12 gauge speaker wire, RCA cables, and an ANL fuse holder with fuse, terminals, a grommet, and zip ties; the enclosure kit adds 20 feet of 14 AWG speaker wire, screws, and spade terminals.
It checks today's price at every store, compares the alternatives and answers in about a minute.


