Prices are checked against each store and labelled with when.
SUNLU PETG is a 1.75 mm glycol-modified PET filament on a 1 kg spool (about 320 m), sold in a range of colors including a coffee brown. It is built for toughness: high impact strength, good layer adhesion and resistance to acids, alkalis and weather, so it suits functional parts used indoors or out. Print settings run hot and fast, roughly 230-240 °C at 50-100 mm/s and 240-260 °C at 100-200 mm/s, with a stated speed ceiling of 300 mm/s. Against PLA it trades easy printing for durability; against ABS it trades some heat resistance for far less warping and no fumes. Owners rate it highly for smooth, consistent extrusion and semi-transparent prints such as light diffusers, though some report stringing and oozing when the spool has absorbed moisture.
In stock
Lowest price we've seen: $11.49 on Nov 18 at SUNLU. Tracked across 1 store since Nov 18.
Rated 4.7 out of 5 across 433 ratings. Buyers call it consistent in color and diameter, smooth to print and good value, and many use it for semi-transparent parts.
PETG filament for 3D printing on a 1 kg spool, with a 1.75 ± 0.02 mm diameter and about 320 m of filament per spool. It is tough and impact resistant, and it holds up to acid and alkali exposure. Excellent layer adhesion reduces warping and gives strong prints.
The filament is engineered to reduce stringing and clogging for smooth, consistent prints. Prints are robust and maintain their properties over time, for indoor and outdoor use. Recommended settings are 230–240 °C at 50–100 mm/s or 240–260 °C at 100–200 mm/s; the printing temperature is 240–260 °C and print speed is up to 300 mm/s.
Use a bed temperature of 60–65 °C with glue; glue is required when the bed is unheated. Dry the filament at 60–65 °C in a blast drying oven and keep it sealed with desiccant below 20% RH.
It checks today's price at every store, compares the alternatives and answers in about a minute.