SUNLU High-Speed Matte PETG is a 3D printing filament with a matte, low-gloss finish that helps disguise visible layer lines. It is made for printing at speeds up to 600 mm/s on printers set up for it.
The filament has a 1.75 mm diameter with a tolerance of ±0.02 mm and is designed for consistent flow and reduced warping. PETG gives dependable layer adhesion, impact resistance and durability in the finished part.
It works with most FDM 3D printers that accept 1.75 mm filament and reach PETG temperatures, run with a nozzle at 240–260 °C and a bed at 70–80 °C. Each roll has a net weight of 1 kg and about 330 m of filament.
- Material
- High-Speed Matte PETG
- Color
- Grey
- Filament diameter
- 1.75 mm, tolerance ±0.02 mm
- Print speed
- Up to 600 mm/s
- Nozzle temperature
- 240–260 °C
- Bed temperature
- 70–80 °C
- Finish
- Matte, low gloss
- Tensile strength
- 46 ± 5 MPa
- Flexural strength
- 75 ± 6 MPa
- Density
- 1.28 g/cm³
- Melt flow index
- 4.4 ± 2 g/10 min
- Heat deflection temperature
- 70 ± 2 °C
- Shore hardness
- 79
- Net weight
- 1 kg per roll
- Filament length
- Approximately 330 m
- Compatibility
- Most FDM 3D printers that accept 1.75 mm filament and reach PETG temperatures