
Sunny Shower Frameless Bypass Sliding Shower Doors Brushed Nickel Finish 60 in.W x 72 in.H
Where to buy
No store is showing a current price right now. The stores below sell it; ask the agent to check today's prices.
Prices are checked against each store and labelled with when.
Our take on the Sunny Shower Frameless Bypass Sliding Shower Doors Brushed Nickel Finish 60 in.W x 72 in.H
A two-panel bypass sliding shower door in 1/4-inch clear tempered glass, sized 60 inches wide by 72 inches high, with a brushed nickel finish and a stainless steel handle. The frameless look and built-in copper rollers give it a cleaner sightline and quieter glide than framed bypass doors, and the top and bottom rails can be trimmed to fit openings from 58.5 to 60 inches. It suits a standard alcove tub or shower replacement where a low-profile glass door is wanted without custom pricing. Against framed rivals it trades some rigidity and water containment for looks; the thin 6mm glass and open edges are the usual trade-offs at this tier.
- Frameless two-panel bypass design with a clean sightline
- 1/4-inch clear tempered glass, ANSI Z97.1 certified
- Copper rollers for smooth, quiet sliding
- Top and bottom rails trimmable to fit 58.5–60 in openings
- Stainless steel handle and aluminum hardware
Sunny Shower Frameless Bypass Sliding Shower Doors Brushed Nickel Finish 60 in.W x 72 in.H prices at every store
- WalmartNew
Out of stockSold by SUNNY SHOWERReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
$309.60Free shippingChecked 3 h ago
About the Sunny Shower Frameless Bypass Sliding Shower Doors Brushed Nickel Finish 60 in.W x 72 in.H
The Sunny Shower Frameless Bypass Sliding Shower Doors are a bypass sliding shower door system. The doors are made of 1/4 inch (6 mm) clear tempered glass that is ANSI Z97.1 certified. Built-in copper rollers make the glass doors slide smoothly and quietly.
The doors measure 60 inches wide by 72 inches high, with a walk-in width of 30 2/5 inches. The top and bottom rails can be cut to fit openings from 58.5 inches to 60 inches wide. The rails are made of aluminum, and the handle is stainless steel.
- Type
- Frameless bypass sliding shower doors
- Dimensions
- 60 in W x 72 in H
- Walk-in width
- 30 2/5 in
- Width adjustment
- 58.5 in to 60 in
- Glass
- 1/4 in (6 mm) clear tempered glass
- Glass certification
- ANSI Z97.1
- Frame material
- Aluminum
- Handle material
- Stainless steel
- Rollers
- Built-in copper rollers
- Installation
- Top and bottom rails cut to fit
Specifications
- color
Ask our agent about this product
It checks today's price at every store, compares the alternatives and answers in about a minute.
Questions and answers
- What size opening does it fit?
- It is built for a 60-inch-wide opening and the top and bottom rails can be cut to fit anything from 58.5 to 60 inches. Height is 72 inches. Measure your opening before ordering, since the trim only covers a small range.
- Is the glass tempered and safe?
- Yes. The panels are 1/4-inch (6mm) clear tempered glass certified to ANSI Z97.1, so they break into small dull pieces rather than shards.
- How wide is the walk-in opening?
- The walk-in width is about 30 2/5 inches, roughly half the door width, since the two panels bypass each other.
- Does it come with everything needed to install?
- The door ships with its aluminum rails, copper rollers, stainless steel handle and glass panels. You supply basic tools and silicone sealant; the rails must be cut to your opening.
- How does it compare with a framed bypass door?
- It looks cleaner and slides more quietly, but framed doors hide wall out-of-square better and the frame helps stiffen thinner glass. Expect more careful leveling with this frameless unit.
- Will it keep water inside the shower?
- Mostly, but the bypass overlap and open sides can let some spray escape. A curb and a properly pitched sill help; a sweep or seal strip on the bottom edge improves containment.



