
Sunpro 440W Bifacial Solar Panel
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The Sunpro 440W is a monocrystalline bifacial PV module that collects light on both faces, which Sunpro rates at up to 30% more yield than a monofacial panel of the same wattage when the rear side sees reflected light. It suits ground mounts, elevated arrays and installations over white roofs, light gravel or snow, where rear gain is real. On a flush roof mount with little backside light it behaves much like a standard 440W panel, so the bifacial premium goes unused. Buyers weighing it against mainstream 400–450W monofacial modules are trading a slightly higher panel cost for extra yield in the right mounting.
In stockReturn policy
The Sunpro 440W Bifacial Solar Panel is a monocrystalline module for residential and commercial solar systems. It uses TOPCon cell technology with 108 half-cut cells and is rated at 440W with 22.53% efficiency. The bifacial design captures sunlight on both the front and rear sides of the panel.
Light reflected or diffused onto the back of the panel adds to its output; the bifacial design increases total energy yield by up to 30% compared with traditional monofacial panels. It suits ground-mount and elevated installations and works over reflective surfaces such as white roofs, light-colored gravel or snow. The low-profile frame design reduces dust and snow accumulation.
The panel is certified to withstand wind loads up to 2.4 kPa and snow loads up to 5.4 kPa, and is built to resist PID and moisture. It measures 67.8 × 44.65 × 1.18 in and weighs 51.37 lbs. A 30-year linear power output warranty guarantees at least 87.4% of rated power after three decades.