The Rockville SV8K6D1 is a single 8-inch vented subwoofer enclosure loaded with one Rockville W8K6D2 V2 subwoofer. It is pre-wired to a 1-ohm final impedance and tuned to 48 Hz.
The enclosure is built from 3/4" MDF with black carpet, and 1" MDF for the sub mounting. It is bonded, stapled and braced, and it has 10 gauge copper push terminals. The front panel is plexiglass with LED lighting that can be set to white or blue.
The subwoofer has a 2" voice coil with a black aluminum former wound with USA-made OFC copper wire. It uses a double-stacked 70 oz magnet, a fiber-reinforced black non-pressed paper cone, a thick foam surround and black stitching reinforcement. A vented T-yoke helps dissipate heat.
- Subwoofer
- 1 x Rockville W8K6D2 V2, 8"
- Power handling
- 1400 watts peak, 350 watts RMS
- Impedance
- Pre-wired to 1-ohm final impedance
- Enclosure type
- Vented, tuned to 48 Hz
- Enclosure material
- 3/4" MDF, black carpet, 1" MDF for sub mounting
- Construction
- Bonded, stapled and braced
- Terminals
- 10 gauge copper push terminals
- Front panel
- Plexiglass with selectable white or blue LED lighting
- Dimensions
- 11.14" H x 13.9" W x 8.8" D (top) / 11.9" D (bottom)
- Voice coil
- 2", black aluminum former, 100% USA-made OFC copper wire
- Magnet
- Double-stacked 70 oz with high BL magnetic motor gap
- Cone and surround
- Fiber-reinforced black non-pressed paper cone, thick foam surround
- Cooling
- Vented T-yoke
- Frequency response
- 44 Hz – 1.5 kHz
- Sensitivity
- 83.4 dB
- XMAX
- 15 mm (one-way)