The Rockville SV8K6D2 is a vented single 8-inch subwoofer enclosure loaded with a Rockville W8K6D4 V2 subwoofer. The subwoofer is pre-wired to a 2-ohm final impedance. The enclosure is tuned to 48 Hz.
The enclosure is built from 3/4" MDF covered in black carpet, with 1" MDF for sub mounting. Construction is bonded, stapled and braced, and 10 gauge copper push terminals handle the connections. The front panel is thick plexiglass with LED lighting that can be set to white or blue.
The subwoofer has a 2" voice coil with a black aluminum former wound with 100% USA-made OFC copper wire. It uses a double-stacked 70 oz magnet with a high BL magnetic motor gap. The cone is a fiber-reinforced, non-pressed black paper cone with a thick foam surround. Black stitching reinforces the build, and a vented T-yoke helps dissipate heat.
- Subwoofer
- 1 x Rockville W8K6D4 V2, 8"
- Power handling
- 1400 watts peak, 350 watts RMS
- Impedance
- Pre-wired to 2-ohm final impedance
- Enclosure type
- Vented, tuned to 48 Hz
- Enclosure material
- 3/4" MDF with black carpet; 1" MDF for sub mounting
- Construction
- Bonded, stapled and braced
- Terminals
- 10 gauge copper push terminals
- Front panel
- Plexiglass with selectable white or blue LED lighting
- Dimensions
- 11.14" H x 13.9" W x 8.8" D (top) / 11.9" D (bottom)
- Voice coil
- 2", black aluminum former, 100% USA-made OFC copper wire
- Magnet
- Double-stacked 70 oz
- Cone and surround
- Fiber-reinforced black non-pressed paper cone, thick foam surround
- Cooling
- Vented T-yoke
- Frequency response
- 44 Hz - 1.5 kHz
- Sensitivity
- 83.4 dB
- XMAX
- 15 mm (one-way)