Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The Rutlands 255mm table saw is a contractor-style saw with a cast aluminium table, a 2,000W motor and a 255mm 48-tooth carbide blade. Its standout feature is a full-length rip fence on rack and pinion rails that locks front and rear and stays parallel to the blade, with a hinged sub-fence for thin stock. Blade height and tilt adjust from one central knob, and the mitre gauge, push stick and tools store on board. It suits woodworkers who rip hardwood, softwood and sheet goods in a home shop and want fence accuracy without a cabinet saw's footprint.
In stockShips from the UK · duties may applyReturn policy
Owners rate it highly, with 4.6 out of 5 from 275 ratings. The fence and the one-knob blade adjustment draw the most praise; complaints centre on the aluminium table and setup time.
This table saw has a large cast aluminium table top with an anti-friction coating, so workpieces move quickly and smoothly. It is powered by a high torque 2000W motor and comes with a 255mm, 48 tooth fine finish blade with 10° ATB carbide teeth. The blade is suitable for general use on hardwood, softwood and composite woods.
The full-length aluminium rip fence locks at both the front and rear of the table. A torsion lever adds clamping strength to stop the fence creeping when sawing large workpieces. Two rack and pinion fence rails keep the fence parallel to the blade, for a maximum ripping capacity of 625mm. A hinged sub-fence can be laid flat to form a low fence for cutting thin workpieces. The blade can be micro-adjusted to stay parallel to the rip fence and mitre slot.
Tilt and height adjustments are made with one hand from a centrally located knob. A no-volt release switch with safety stop prevents the saw from restarting after a power cut. The mitre gauge, push stick, tool kit and power cable all store on the saw. The stand has four tubular legs with no mar rubber feet, and one leg is height adjustable for uneven floors. The saw ships with the riving knife in its storage position. It must be raised above the blade before use, as described in the supplied user guide.
