What machines does this push stick work on?

It is intended for table saws, radial saws, jointers, shapers and router tables. Any setup where you need to feed stock past a cutter while keeping your hands back will work.

How long is it and how much does it weigh?

About 28 cm (11 inches) long and roughly 92 grams. That is light enough to hold for long sessions without tiring your wrist.

Is it a pair or a single stick?

One push stick is included. Nothing else comes in the box, so buy two if you want one at the table saw and one at the router table.

Does it grip narrow pieces well?

The shaped handle helps with control on narrow stock, but the ABS tip is smooth. For very thin or slick material, a rubber-tipped push block holds better.

Is it better than a push block?

It is simpler and takes less space, and it keeps your hand further from the blade on narrow rips. A push block gives more downward pressure and grip on wider or slippery stock.

Molded ABS plastic in yellow. It is rigid and light, but it will not survive being cut by the blade the way a wooden shop-made stick can be trimmed and reused.

Where is the Table Saw Push Stick Safety Push Stick cheapest?

At Walmart, for $8.69, as of our latest check.

Elowen

Table Saw Push Stick Safety Push Stick

Best price now

$8.69at WalmartChecked Nov 9

Prices are checked against each store and labelled with when.

Visit Walmart

Elowen

Table Saw Push Stick Safety Push Stick

Best price now

$8.69at WalmartChecked Nov 9

Prices are checked against each store and labelled with when.

Visit Walmart

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $8.69 at Walmart on Nov 9.

Our take on the Table Saw Push Stick Safety Push Stick

A single 11-inch push stick molded from ABS, meant to keep hands clear of the blade when feeding narrow stock on a table saw, router table, shaper or jointer. The yellow body is easy to spot against a dark table, and the shaped handle gives a steadier grip than a plain flat stick. At about 92 grams it is light enough to keep at hand all session. It is a basic safety accessory, so compare it with hook-style or magnetic push blocks that grip stock better but cost more and take up more room.

Best forHobby woodworkers on a budgetTable saw and router table usersCutting narrow rips and offcutsKeeping a spare stick near each machine

Pros

Bright yellow body stands out on the saw table
Shaped handle gives a more secure grip than a flat stick
Light ABS body, about 92 grams
Works on table saws, radial saws, jointers and router tables
Simple one-piece design with nothing to assemble

Cons

Plain ABS tip offers less grip than rubber-faced push blocks
No hook or heel to push stock from behind
Single stick only, no pair or storage mount
Short 11-inch length may not suit deep cuts on large saws

Table Saw Push Stick Safety Push Stick prices at every store

WalmartNew
In stockSold by Personal Care SpecificReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
$8.69Free shippingChecked Nov 9
Visit Walmart

About the Table Saw Push Stick Safety Push Stick

This push stick helps guide and control stock while you work at a table saw, shaper, jointer or router table. It keeps your hands away from the cutting area and gives extra control over narrow pieces. It is also meant to help prevent kickbacks.

The body is made of ABS. The handle is ergonomic and gives a comfortable, steady grip throughout the cut. The yellow color makes the push stick easy to see during use.

Material: ABS
Color: Yellow
Length: Approx. 28 cm / 11.02 in (1-2 cm measurement error possible)
Weight: Approx. 92 g
Use with: Table saw, radial saw, shaper, jointer, router table
In the box: 1 x push stick

Specifications

color: MulticolorSource

Questions and answers

What machines does this push stick work on?: It is intended for table saws, radial saws, jointers, shapers and router tables. Any setup where you need to feed stock past a cutter while keeping your hands back will work.
How long is it and how much does it weigh?: About 28 cm (11 inches) long and roughly 92 grams. That is light enough to hold for long sessions without tiring your wrist.
Is it a pair or a single stick?: One push stick is included. Nothing else comes in the box, so buy two if you want one at the table saw and one at the router table.
Does it grip narrow pieces well?: The shaped handle helps with control on narrow stock, but the ABS tip is smooth. For very thin or slick material, a rubber-tipped push block holds better.
Is it better than a push block?: It is simpler and takes less space, and it keeps your hand further from the blade on narrow rips. A push block gives more downward pressure and grip on wider or slippery stock.
What is it made of?: Molded ABS plastic in yellow. It is rigid and light, but it will not survive being cut by the blade the way a wooden shop-made stick can be trimmed and reused.
Where is the Table Saw Push Stick Safety Push Stick cheapest?: At Walmart, for $8.69, as of our latest check.