

The Tempest UREM40E is a massive-electrode aviation spark plug with an 18 mm thread, 1/2 in reach and a 5/8-24 harness connector. Its heat rating is 40, and it uses a copper-cored nickel-alloy center electrode, a high-alumina ceramic insulator and a glass center seal with integral resistor. It is gapped at the factory to 0.016–0.021 in. It suits owners of short-reach Continental and Lycoming cylinders and comparable radial engines who want a low-cost alternative to the big-brand plugs.
In stockShips from Czechia · duties may applyReturn policy
Owners of small Continental and Lycoming engines generally report the UREM40E runs clean and starts well, and many treat it as a straight substitute for Champion massive-electrode plugs. Complaints center on fouling in engines run rich and on the need to confirm the application chart before ordering.
The Tempest UREM40E is an FAA-PMA aviation spark plug with a massive electrode. It has an 18 mm mounting thread and a 1/2 in reach. The harness connector thread is 5/8-24, with a 3/4 in wrench on the B-nut.
The center electrode has a copper core co-extruded inside a nickel-alloy sleeve. The plug has a high-alumina ceramic insulator and a glass center seal with an integral resistor. It is gapped at the factory to 0.016-0.021 in, and its heat rating is 40.
Tempest lists the UREM40E for short-reach cylinders on a range of engines. The final choice of plug depends on the engine model, so check the engine or airframe parts listing and approved data. Install it with a new copper gasket (Tempest UM-674) and tighten it to the torque the engine manufacturer specifies.
