
The Fluid Marshal 12V/24V Portable Electric Oil Transfer Pump
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
The Fluid Marshal is a portable electric pump that moves fuel, diesel, engine oil, and hydraulic fluid at 1–4 liters per minute. It runs on 12V or 24V DC via alligator clamps, self-primes, and has an automatic shutoff that cuts power within 2 seconds when the intake runs dry. At 1.8 pounds, it is small enough to store in a tool chest. Compared with manual hand pumps, it is faster and cleaner, but it lacks the flow rate and duty cycle of larger shop pumps.
In stockShips from China · duties may applyReturn policy
The Fluid Marshal is a portable electric transfer pump that runs from a 12V or 24V DC battery. Its self-priming rotary vane pump head has a PTFE impeller and a glass-filled nylon housing, and it moves gasoline, diesel, kerosene, engine oil, hydraulic fluid, ethanol blends and water. Alligator-clamp power leads connect to a car, truck or marine battery, and the pump detects the input voltage on its own.
The intake is an 18-inch (45 cm) flexible corrugated wand with an 80-micron stainless steel mesh screen that catches particulate before it reaches the impeller chamber. Fluid leaves through a 6.5-foot (2 m) reinforced PVC delivery hose with a 3/8-inch inside diameter and a swivel spout that clips to a drain pan or jerry can. Flow runs 1 to 4 liters per minute and varies with viscosity, so thinner fluids move faster and thicker ones slower. An air sensor in the wand cuts power within 2 seconds when the tank runs empty.
The pump weighs 1.8 lbs (0.82 kg). It draws up to 5A at 12V and 3A at 24V. After use, flush it with a cup of fresh fuel to clear the lines.
It checks today's price at every store, compares the alternatives and answers in about a minute.