The H2 Spring is a 380ml bottle that dissolves hydrogen into drinking water at the press of a button. You fill it, press once, and the water carries 1000 to 4000 parts per billion of dissolved hydrogen. The actual concentration depends on the mineral content of the water used.
It uses a dual-chamber SPE/PEM electrolysis stack with a DuPont NAFION 117 membrane. Only hydrogen crosses into the drinking chamber, while oxygen, ozone and chlorine are separated out and vented. The electrode is titanium with a platinum coating, which resists corrosion.
The bottle charges over USB at 5V and 3.5W. It works with pure, mineral and reverse-osmosis water between 1 and 60 degrees Celsius, and needs no proprietary cartridge. A cycle takes a few minutes and produces water at an oxidation-reduction potential of roughly minus 300 to minus 650 millivolts.
- Capacity
- 380ml
- Dimensions
- 70mm diameter, 210mm height
- Hydrogen concentration
- 1000 to 4000 ppb, depending on source water quality
- ORP range
- Minus 300 to minus 650mV, depending on source water quality
- Membrane
- DuPont NAFION 117, SPE and PEM dual chamber
- Electrode
- Titanium substrate with platinum coating
- Water temperature
- 1 to 60 degrees Celsius
- Water compatibility
- Pure, mineral and reverse-osmosis water
- Power
- DC 5V, 3.5W, USB rechargeable
- Certification
- CE and RoHS