The Photon Drifter is a flexible solar panel kit built with monocrystalline silicon cells, with conversion efficiency of up to 23%. It has an ETFE-laminated surface instead of glass, which is UV-resistant and anti-reflective. The panel bends to a 30-degree arc, so it can fit curved surfaces such as RV roofs, boat decks, teardrop trailers and cabin roofs.
The cells are laser-cut and arranged in a series-parallel layout. When one section of the panel is shaded, the rest keeps producing power. The 100W panel weighs 4.8 lbs (2.18 kg). The surface is IP65 weather-resistant and rated for rain, snow and salt spray.
The kit includes a PWM charge controller with USB 5V output, alligator clips and MC4-compatible cabling. For portable use, unroll the panel, point it at the sun and connect it to a battery. For permanent mounting, use the pre-installed grommets with screws or zip-ties, or attach it with adhesive such as 3M VHB tape. The MC4-compatible connectors let it connect to existing solar arrays.
- Cell type
- Monocrystalline silicon
- Power options
- 50W, 100W, 120W
- Efficiency
- Up to 23% conversion efficiency
- Surface
- ETFE (ethylene tetrafluoroethylene) laminate
- Max bend
- 30 degrees
- Weight
- 4.8 lbs (2.18 kg) for the 100W panel
- Charge controller
- PWM, 10A/20A, with USB 5V output
- Connectors
- MC4 compatible
- Weather rating
- IP65
- Operating temp
- -40°C to 85°C
- Mounting
- Pre-installed grommets for screws, zip-ties or adhesive; portable use with alligator clips
- In the box
- Flexible solar panel, PWM charge controller with USB output, alligator clips, MC4-compatible cabling