This combo pairs the KT-T830 wheel clamp tire changer with the KT-B760 wheel balancer. The tire changer has an alloy steel jaw with a jaw cover, a stainless steel mounting head with a plastic cover, and a spade cover to protect the rim. It has a pull-type pedal control system, an inflation gauge with pedal control, a double side assist arm, and a bead blast seater head with a post tank. The 186mm / 7.32″ stainless bead breaker cylinder and a closed body protect the parts inside. A lubricator filters compressed air and supplies oil drops to extend the life of the pneumatic system.
The tire changer's motor uses pure copper winding. For North America, it supports a 110V single-phase 2.0HP motor.
The balancer measures A and D values automatically with a built-in ruler. Its body is 3mm-thick steel, and the bottom and side boards of the sensor support are 8mm thick. The 36mm shaft thread is quench-treated, and the longer shaft fits wider wheels. It has various balance modes for different rim types, built-in fault diagnosis, and double-side self-calibration with no pre-set parameters. Units can be switched between ounce/gram and mm/inch. A wheel guard is optional.
- Tire changer model
- KT-T830
- Max wheel diameter
- 41″ / 1040mm
- Max wheel width
- 15″ / 380mm
- Outside clamp
- 12″-22″
- Inside clamp
- 14″-24″
- Changer power supply
- 120V 1PH
- Changer motor
- 2.0HP / 1.5KW
- Rotation speed
- 6.8 r/min
- Air pressure
- 0.8-1.0 MPa (116-145 psi)
- Changer weight
- Net 240kg / 529 lbs
- Balancer model
- KT-B760
- Rim diameter
- Under 30″
- Wheel width
- 3″-12″
- Wheel diameter
- Under 880mm / 34.64″
- Balancing speed
- 180 rpm
- Balancer power supply
- 110V 1PH
- Balancer motor
- 0.25KW
- Rim center hole
- Under 135mm / 5.31″
- Max wheel weight
- Under 65kg / 143 lbs
- Balancing accuracy
- ±1g
- Measuring time
- 7 seconds
- Optional
- Wheel guard (balancer)