Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The TMF Dually is a portable carpet and hard-surface extractor built for professional cleaning work. It pairs an 800 PSI pump with a 1500-watt inline heater and two 2-stage vacuum motors wired in parallel, so it delivers hot solution and strong suction on carpet, tile, grout and upholstery. A pressure-adjusting valve at the machine, on-the-fly chemical metering and an automatic pump-out reduce stops between rooms. It suits working cleaners who want one heated unit instead of separate cold-water and low-pressure machines; the trade-off is a heavier, more power-hungry box than basic cold portables.
In stockReturn policy
The TMF Dually Heated Portable Extractor cleans carpet, tile, grout and upholstery. It has a pump that runs at 800 PSI, a 1500-watt inline heater and two 2-stage vacuum motors wired in parallel. The heater comes up to temperature in about 5 minutes and holds it through the job.
Pressure is set at the machine with the pressure adjusting valve. Chemical is metered into the incoming water automatically, and the ratio is adjustable. A float-triggered automatic pump-out empties the recovery tank during use. The 2" vacuum port drops to 1.5" with the included enlarger cuff. A built-in freeze protection feature lets you blow the pump and hoses clear with air before cold-weather storage.
On carpet, use short forward and back strokes and keep pressure under 500 PSI to protect the fibers. For tile and grout, pre-spray your grout cleaner and let it dwell, then rinse and extract with the machine. On upholstery, use gentler pressure for automotive and furniture work. The float shut-off screen and in-line filter are removable, and the machine stores upright. Do not run acidic chemicals through the pump and metering system. This is not covered by the warranty and shortens pump life. Pre-apply acidic products separately and rinse with the machine.
