
ToolkitRC P200 V2 Mini 30V 10A 200W Adjustable Power Supply - XT60
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
The ToolkitRC P200 V2 is a compact bench power supply rated at 200W, with adjustable voltage up to 30V and current up to 10A. It is aimed at hobbyists who charge LiPo packs, run RC chargers or bench-test electronics and want a small, accurate supply instead of a bulky lab unit. It also has a USB output that supports multiple fast-charge protocols and data transfer. Against larger linear bench supplies it trades raw output and fine controls for size and portability; against basic fixed-voltage adapters it adds adjustable voltage and current with metering.
In stockReturn policy
The ToolkitRC P200 V2 is a compact, fully adjustable DC power supply with a 1.0-30.0 V and 1.0-10.0 A main output. Output is limited to 100 W on AC input and 200 W on DC input. Voltage and current are set across those ranges to the accuracy the work needs.
It runs from an AC supply of 100-240 V or a DC source of 7-28 V at up to 10 A. A 1.54-inch IPS LCD at 240x240 resolution shows the settings, and protection against short circuit, overcurrent and overvoltage reacts in under 1 ms, with an 8 ms control cycle. The main output uses a 4.0 mm banana female port.
A USB-C port supplies 5.0-20.0 V at up to 65 W and supports fast-charge protocols including PD 3.0, PD 2.0, PPS, QC4, QC3.0, QC2.0, AFC, FCP, SCP, PE2.0, PE1.1, SFCP and VOOC, and the port also handles data transfer and firmware upgrades. Reaching the advanced charging protocols needs a USB-C to USB-C cable, which is not included.
It checks today's price at every store, compares the alternatives and answers in about a minute.




