Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
This is a replacement thru-axle that lets a full-suspension QuietKat e-bike pull a cargo trailer. It is made with the Robert Axle Project and swaps out the stock axle so the trailer bobbins mount on both sides. It fits the 2019-21 RidgeRunner and the 2020-23 Jeep E-Bike, and QuietKat lists the Ibex among the full-suspension models it serves. It is a single-purpose part: it adds towing and nothing else, so it only makes sense if you already own a compatible bike and a QuietKat trailer.
In stockReturn policy
This trailer axle lets a full-suspension e-bike connect to a QuietKat cargo trailer. It is required on full-suspension e-bikes for the trailer connection. It is for the full-suspension models in the QuietKat RidgeRunner, Ibex, and Jeep lines.
It was designed and produced with the Robert Axle Project and is calibrated for QuietKat full-suspension e-bikes. It completely replaces the standard axle that comes with QuietKat trailers, with the same secure connection and reliability as the stock axles.
To install, unscrew the bobbin on the threaded side of the full-suspension axle. Remove the standard axle on the brake side of the e-bike and insert the BOB axle through the assembly. Tighten the threaded axle with a 5 mm hex wrench and re-attach the bobbin. Then load the cargo trailer onto the bobbins on either side, lock the sides in place, and secure them with the attached safety pins.