Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
A wheel bearing kit for Tie Down Engineering trailer axles rated 2,000 to 2,200 lb. It pairs 1-1/16-inch inner and outer bearings with a 1.25-inch grease seal, so both bearings and the seal come in one box. It suits owners repacking or replacing bearings on a light utility, boat or small cargo trailer with a Tie Down axle. Rivals sell similar 1-1/16-inch kits, but many bundle a different seal size, so matching the 1.25-inch seal to your spindle is the deciding feature here.
In stockReturn policy
This trailer wheel bearing kit is made for Tie Down Engineering axles rated at 2,000 lb and 2,200 lb. It uses 1-1/16" inner and outer bearings and a 1.25" grease seal. Many axles in this capacity range use a 1.50" seal instead.
The kit fits hubs that require a 1.25" grease seal. It is used on both leaf spring and torsion axle configurations and is common on boat trailers. The inner and outer bearings are the same size. One kit services one wheel.
Check the bearing numbers, seal diameter and axle manufacturer before installing. Tie Down axles may differ from standard axle configurations, and many 2,000 lb axles use 1.00" bearings instead.
