Prices are checked against each store and labelled with when. Store links may earn us a commission. As an Amazon Associate, Deal.ai earns from qualifying purchases.
It checks today's price at every store, compares the alternatives and answers in about a minute.
A complete idler hub kit for 2,000 lb trailer axles with 1" x 1" straight spindles. It includes the cast iron hub, inner and outer L44643 bearings, races pressed in, a double-lip grease seal, lug nuts, cotter pin and dust cap. The 5 on 4.5" pattern with 1/2" studs is one of the most common trailer bolt patterns, so wheels are easy to find. The hub itself is rated 1,250 lbs, so the pair of hubs on a 2,000 lb axle carries the load with margin. Buyers should confirm the old bearings are stamped L44643, since not every 2,000 lb axle uses this size.
Availability unknown
As an Amazon Associate, Deal.ai earns from qualifying purchases.
Also available at
Store links may earn us a commission.
Lowest price we've seen: $18.88 on Nov 13 at Amazon. Tracked across 1 store since Nov 13.
This is a complete trailer idler hub assembly for standard 1" x 1" straight 2000 lb. axle spindles. It has a 5 on 4.5" bolt pattern and uses L44643 inner and outer bearings. It can replace any trailer wheel idler hub that requires these specifications, regardless of make or manufacturer.
The hub is cast iron with an e-coat finish for corrosion resistance. The kit includes the hub, bearings, seal, lug nuts, cotter pin and dust cap. The bearing races are included and pressed in.
Not all axles rated at 2000 lbs. use this hub. Your axle and hub could require a different seal and bearings. To confirm a match, check that the bearings in the hub you are replacing have L44643 stamped or printed on them.
