Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
This is a complete idler hub kit for 2,500 lb trailer axles with 1-1/16 inch straight spindles. It includes the cast iron, e-coated 5-on-4.5 hub, inner and outer L44649 bearings, races already pressed in, a double-lip grease seal, lug nuts, cotter pin and dust cap. It suits owners repacking or replacing a hub on a small utility, boat or cargo trailer. The kit's value is that it arrives as one assembly with the races fitted, so you avoid sourcing bearings, seal and hardware separately. Confirm your old bearings are stamped L44649, since not every 2,500 lb axle uses this hub.
In stockReturn policy
This is a complete 5-lug trailer idler hub assembly for 2,500 lb. axles with 1 1/16" straight spindles. The kit includes the hub, inner and outer bearings, a seal, lug nuts, a cotter pin and a dust cap.
The hub is made of cast iron with an e-coat finish for corrosion resistance. The bearing races are included and pressed in. It can replace any trailer idler hub that requires these specifications, regardless of make or manufacturer.
Not every axle rated at 2,500 lbs. uses this hub. To confirm it is the right one, check that the bearings in the hub you are replacing have L44649 stamped or printed on them.
