The Tronxy Veho 600 Pro V3 is a large-format 3D printer with a 600 x 600 x 600 mm build volume. It runs Klipper firmware and prints at up to 300 mm/s.
It uses a direct drive extruder with a 0.4 mm nozzle that reaches 320°C and has a flow rate of 32 mm²/s. Seven sets of linear guides (4 Z, 2 Y and 1 X) guide the motion. Layer thickness ranges from 0.1 to 0.4 mm.
A 7-inch high-definition capacitive touchscreen handles control. You can connect over WiFi or USB.
- Build volume
- 600 x 600 x 600 mm
- Machine dimensions
- 850 x 851 x 1010 mm
- Print speed
- Up to 300 mm/s
- Firmware
- Klipper
- Extruder
- Direct drive
- Nozzle diameter
- 0.4 mm
- Nozzle temperature
- Up to 320°C
- Nozzle flow rate
- 32 mm²/s
- Layer thickness
- 0.1-0.4 mm
- Linear guides
- 7 sets (4 Z, 2 Y, 1 X)
- Screen
- 7-inch high-definition capacitive touchscreen
- Connectivity
- WiFi, USB