The CT Sounds TROPO-2X12D4 is a loaded dual 12-inch ported subwoofer enclosure with two TROPO-12-D4 subs already mounted and wired. The dual 4-ohm voice coils are pre-wired to a 1-ohm final load at the terminal cup, so it connects straight to a mono amplifier with no box building or wiring work. A kerf port and rabbet-grooved interior walls reduce port noise, and dado and miter joints stiffen the cabinet. It suits shoppers who want strong output without a custom build; against bare subs plus a separate enclosure, it trades flexibility for plug-and-play simplicity.
In stockReturn policy
In stockReturn policy
Availability unknown
As an Amazon Associate, Deal.ai earns from qualifying purchases.
Store links may earn us a commission.
Lowest price we've seen: $379.99 on Nov 19 at Amazon. Tracked across 1 store since Nov 19.
Owners rate it highly and describe hard-hitting, clean bass right out of the box. Most praise the build and the easy hookup; a few note the size and the amplifier matching it demands.
This is a pre-loaded dual 12-inch ported subwoofer box. It comes with two TROPO-12-D4 subwoofers, each rated at 1300 watts max power. The subwoofers are mounted flush in the 1.25-inch front baffle with claw nuts and fasteners for an air-tight seal.
The two 4-ohm subwoofers are pre-wired inside the enclosure with 12 gauge OFC wire. This gives a 1-ohm final impedance at the terminal cup. To install, run a positive and negative wire from the terminal cup to the speaker terminals on your amplifier.
The kerf port lets air pressure exit smoothly and quickly. A 3-mm rabbet groove runs 80-mm into the left and right interior port walls, so the black carpet lies flush inside the port. This gives air a smooth exit and eliminates port noise. The box is built with dado joints connecting the left, right, top, bottom and back pieces. The corners are mitered at 45 degrees for maximum surface contact and to eliminate vibration.
It checks today's price at every store, compares the alternatives and answers in about a minute.







