
TwoTrees TS2 20W Desktop Diode Laser Engraving & Cutting Machine
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The TwoTrees TS2 is a desktop diode laser engraver and cutter with a 410 x 410 mm work area and a 20W compressed-spot laser. TwoTrees rates it to cut 8mm plywood, and the LD+FAC+C-lens optics tighten the spot to about 0.08mm for cleaner, deeper cuts. It adds auto focus on the Z-axis, offline jobs over Wi-Fi, TF card or USB, and a built-in ESP32 board running LaserGRBL or LightBurn. Safety features include a flame detector, fire alarm, auto power-off, a protection cover and a laser that stops within 10 seconds when the head stalls. It suits hobbyists and small shops who want a large bed and real cutting power at a diode price; it is not a sealed CO2 cabinet machine, so venting and eye protection still matter.
In stockReturn policy
The TwoTrees TS2 is a desktop diode laser engraving and cutting machine with a 410 x 410 mm working area. Its 20W laser module uses compressed spot technology with an LD+FAC+C-lens, producing a spot up to 0.08 mm. It cuts 8 mm plywood and engraves materials such as wood, plastic, paper, leather, bamboo, stainless steel, acrylic, and glass.
The machine has a 32-bit ESP32-DOWD-V3 control board and supports LaserGRBL and LightBurn software. It can be controlled through USB, Wi-Fi, TF card, or the app, and supports offline engraving. The Z-axis height is set with a software button for automatic focus. It comes 60% pre-assembled with a modular design and has silk-screened scale markings for positioning work.
Safety features include a flame detector with alarm and automatic power off, a protection cover, an emergency stop button, and limit switches on the X and Y axes. The laser stops within 10 seconds if the machine stops moving, such as when the laser head is obstructed. A built-in air assist kit improves cutting and engraving; an external air pump is an additional accessory. The machine uses double drag chains for cable management and has X/Y belt tensioners.