Is this plywood strong enough for a shelf?

At 1/2 inch thick over a 24-inch span, it will sag under heavy loads. Add a support or lip in the middle for books or tools, or use it for shorter spans.

Can I use it outdoors?

No. This is an interior-grade birch plywood panel. Moisture will delaminate the plies and stain the face, so keep it in dry, interior conditions.

How does it compare with MDF?

Birch plywood is lighter, holds screws better and has a real wood face for finishing. MDF is flatter and cheaper but heavier and weaker at the edges.

One birch plywood panel measuring 1/2 inch by 24 inches by 24 inches.

Yes. Birch takes stain, though it can blotch, so a pre-stain conditioner helps. Sand the face lightly first and test on a scrap.

Do I need to finish the edges?

Yes. The cut edges show plies. Iron-on edge banding or a filler and paint will give a clean look.

What do buyers say about the UFP Industries Birch Plywood Panel, 1/2" x 24" x 24" Inches?

Rated 4 out of 5 from 5 ratings.

Dexter

UFP Industries Birch Plywood Panel, 1/2" x 24" x 24" Inches

Best price now

$33.90at WalmartChecked Nov 11

Prices are checked against each store and labelled with when.

Visit Walmart

Dexter

UFP Industries Birch Plywood Panel, 1/2" x 24" x 24" Inches

Best price now

$33.90at WalmartChecked Nov 11

Prices are checked against each store and labelled with when.

Visit Walmart

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $33.90 at Walmart on Nov 11.

Our take on the UFP Industries Birch Plywood Panel, 1/2" x 24" x 24" Inches

A 1/2-inch birch plywood panel cut to a 24-by-24-inch square. Birch face veneers give a smooth, light, close-grained surface that takes paint, stain and clear finish well, and the half-inch thickness is stiff enough for shelves, cabinet backs and small built-ins. It is a project-sized panel rather than a full sheet, so it suits craft, hobby and repair work where you do not want to break down a 4x8 sheet. Compared with pine or Lauan project panels, birch costs more but shows fewer knots and a cleaner face; compared with MDF, it holds screws better and is lighter.

Best forSmall shelves and cabinet partsCraft, hobby and model buildingDrawer bottoms and cabinet backsRepair and patch work

Pros

Smooth birch face with tight, even grain
Takes paint, stain and clear finish well
Half-inch thickness is stiff for its size
Holds screws better than MDF of the same thickness
Pre-cut square saves cutting a full sheet

Cons

Only 2 feet square, so large projects need several panels
Birch face veneer can chip or splinter when cut
Not rated for structural or exterior use
Edges are raw and need banding or filler

UFP Industries Birch Plywood Panel, 1/2" x 24" x 24" Inches prices at every store

WalmartNew
In stockSold by Supply the HomeReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
$33.90Free shippingChecked Nov 11
Visit Walmart

About the UFP Industries Birch Plywood Panel, 1/2" x 24" x 24" Inches

This is a birch plywood panel from UFP Industries. It measures 1/2" thick by 24" by 24".

It is made to a standard residential spec. It is intended for US residential and light-commercial work, including new construction, full remodels and individual replacement jobs. Apply or install it according to the manufacturer's directions.

Material: Birch plywood
Thickness: 1/2"
Dimensions: 24" x 24"
Size: 1/2" x 24" x 24"
Use: Residential and light-commercial installation

Specifications

color: MulticolorSource
size: 24" x 24"Source

Questions and answers

Is this plywood strong enough for a shelf?: At 1/2 inch thick over a 24-inch span, it will sag under heavy loads. Add a support or lip in the middle for books or tools, or use it for shorter spans.
Can I use it outdoors?: No. This is an interior-grade birch plywood panel. Moisture will delaminate the plies and stain the face, so keep it in dry, interior conditions.
How does it compare with MDF?: Birch plywood is lighter, holds screws better and has a real wood face for finishing. MDF is flatter and cheaper but heavier and weaker at the edges.
What is in the box?: One birch plywood panel measuring 1/2 inch by 24 inches by 24 inches.
Can I stain it?: Yes. Birch takes stain, though it can blotch, so a pre-stain conditioner helps. Sand the face lightly first and test on a scrap.
Do I need to finish the edges?: Yes. The cut edges show plies. Iron-on edge banding or a filler and paint will give a clean look.
Where is the UFP Industries Birch Plywood Panel, 1/2" x 24" x 24" Inches cheapest?: At Walmart, for $33.90, as of our latest check.
What do buyers say about the UFP Industries Birch Plywood Panel, 1/2" x 24" x 24" Inches?: Rated 4 out of 5 from 5 ratings.

More from Dexter

7000 lb Trailer Bearing Kit - Dexter Compatible

6000 lb Trailer Bearing Kit – Dexter Compatible

Dexter Trailer Wheel Bearing Kit L44649 L44610 with 12192 Seal

All Dexter deals and products →