Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The Uni-Ram U103-S is a pressure-fed abrasive blaster that runs on compressed air and works with silica sand, glass beads, metal shot, aluminum oxide, nut shells and baking soda. It ships with three nozzles, a 10 ft 4-ply heavy-duty hose, a moisture filter and a pressure regulator, plus a quick-disconnect coupling so the hose comes off the tank. That accessory set and the abrasive range put it above bare tank-and-hose kits, which usually leave you to buy filtration and regulation separately. It suits automotive, marine, industrial and restoration work where rust, paint and corrosion have to come off flat steel.
In stockReturn policy
The Uni-Ram U103-S is a pressure sand blaster for removing rust, paint, corrosion and other surface contaminants. It is used in automotive, marine, industrial and restoration work. It has a larger capacity and longer reach than smaller units, and it comes with a moisture filter and a pressure regulator.
The tank has a funnel top and a removable, maintenance-free filler plug. An air inlet shut-off valve and an abrasive flow control valve manage the air and the media. A pressure gauge shows tank pressure, and a pressure release valve opens at 140 PSI. The unit has a durable powder paint finish and heavy duty wheels for moving it around.
It works with many abrasives, including silica sand, glass beads, metal shot, aluminum oxide, nut shells and baking soda. A quick disconnect coupling lets you remove the hose easily. The operator should wear protective clothing, at a minimum gloves and goggles. Relieve the pressure in the tank when the unit is not in use, and repair air leaks promptly.
