- Is this panel strong enough for a house roof?
- It is a 29-gauge corrugated panel, which is light-duty. It suits sheds, barns, porches and outbuildings; a house roof usually calls for a heavier gauge or a structural standing-seam panel.
- How much area does one panel cover?
- Each panel is 6 ft long and 2.15 ft wide, about 28.7 sq ft of coverage. Plan for overlap at the sides and ends, so actual covered area per panel is less.
- Do I need special tools to cut it?
- No. Standard tin snips or common aviation snips cut it. Avoid a grinder, which can burn off the zinc coating along the cut and invite rust.
- Can I paint it?
- It comes unpainted in mill finish. Galvanized steel needs a primer made for zinc before topcoat paint, or the finish will not bond well.
- Will it rust?
- The galvanized zinc coating protects the steel, and the panel will not rot, warp or mildew. Cut edges and scratches are the first places to show rust, so touch them up.
- What fasteners does it take?
- Use screws with sealing washers made for metal roofing, driven into the raised corrugation or purlin as your system requires. Standard roofing nails will not seal.
- Where is the Union Corrugating Corrugated Metal Roofing Panel cheapest?
- At Doug Ashy Building Materials, for $24.69, as of our latest check.
- Where can I buy the Union Corrugating Corrugated Metal Roofing Panel?
- 9 stores we checked sell it, including Orange County Building Materials, Doug Ashy Building Materials, Gabriel Building Supply, Valley Outdoor Supply, Cox Hardware and Lumber.