This knotless braided netting is personnel fall safety netting. It is designed and tested to catch workers falling from up to 30 feet. It meets or exceeds ANSI A10.11 (2010) and OSHA 1926.105 requirements.
The net is made in the USA from UV-inhibited Type 6, 6 nylon. It is bordered with synthetic rope with a 5,000 lb. minimum test, and hooks are spaced every four feet on center. An optional debris liner adds 1/16-inch high-density knit polyethylene mesh to contain debris.
Nets must be installed no more than 30 feet below the walking or working surface. Custom configurations are available on request.
- Width
- 180" wide
- Breaking strength
- 1,146.53 lbs.
- Mesh size
- 2.76"
- Material
- Type 6, 6 nylon, UV inhibited
- Border
- Synthetic rope, 5,000 lb. minimum test
- Hooks
- Spaced every four feet on center
- Standards
- Meets or exceeds ANSI A10.11 (2010) and OSHA 1926.105
- Fall rating
- Tested for falls up to 30 feet
- Debris liner
- Optional, 1/16-inch high-density knit polyethylene mesh
- Sizes
- 5' x 10', 10' x 10', 10' x 15', 10' x 20', 10' x 40', 15' x 15', 15' x 20', 15' x 40', 20' x 25', 20' x 40', 25' x 25', 25' x 50'
- Installation
- No more than 30 feet below the walking/working surface
- Care
- Inspect at least once a week and after any event that could affect integrity; promptly replace compromised sections
- Origin
- Made in the USA
- In the box
- Serial-numbered tag listing manufacturing date, composition and prototype test date