Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The US Stove 5040Ei is a pellet insert that drops into an existing masonry or zero-clearance fireplace and turns an open hearth into a sealed, fan-driven heater. It puts out up to 40,000 BTU, enough for roughly 1,800 square feet, and its 45 lb hopper runs up to about 40 hours between fills. A programmable digital board and an IR remote handle heat range, fan speed and feed rate. Against freestanding pellet stoves it saves floor space and needs no venting through a wall, but it depends on a sound fireplace and liner, and it is a supplemental heater rather than a whole-home furnace.
In stockReturn policy
Owners of pellet inserts in this class tend to value the long burn time and the convenience of programmable, remote control. Common complaints center on cleaning upkeep and on installation depending heavily on the existing fireplace and venting.
The US Stove 5040Ei is a pellet stove insert with a surround. It delivers up to 40,000 BTUs and heats spaces up to 1,800 square feet. It is built to drop into an existing masonry or zero-clearance fireplace and turn an open hearth into a pellet heater.
The firebox is welded heavy-gauge steel. A black surround panel is included to frame the unit against the fireplace opening. A convection blower circulates warm air into the room. An automatic igniter starts the fire.
A digital control board adjusts heat range, fan speed and feed rate. An IR remote works with the sensor on the stove. The stove also supports a wired wall thermostat in High/Low mode. It has no Wi-Fi. The stove burns only PFI-certified premium hardwood pellets. Corn, coffee pellets and other alternative biomass fuels can damage it and void the warranty. It can vent through an existing chimney or through the ceiling.
