Free shipping on everything10% off your first orderNo account needed · Buy 2, save 10% · 3+, save 15%

USB Lavalier Condenser Microphone
This one just sold out
It was sold and shipped by Deal.ai. The store has more like it, with free shipping on everything.
See similar productsAsk our agent about this product
It checks today's price at every store, compares the alternatives and answers in about a minute.
Our take on the USB Lavalier Condenser Microphone
A clip-on omnidirectional condenser mic that plugs straight into a USB-A port, with a 2 m cable and a 3.5 mm jack socket on the adapter. The omnidirectional capsule picks up speech from any direction, so placement is forgiving for interviews, calls and desk recording. It needs no audio interface or drivers, which is its main edge over XLR lavaliers and studio condensers. The 74 dB signal-to-noise ratio and 50 Hz–18 kHz range are modest but fine for voice; expect it to suit spoken word more than music.
- Plugs into USB-A with no drivers or interface
- Omnidirectional pickup is forgiving of head movement
- 2 m cable gives room to move
- Spring clip attaches to a collar or lapel
- 3.5 mm socket on the adapter adds flexibility
About the USB Lavalier Condenser Microphone
The USB Lavalier Condenser Microphone is a clip-on microphone with a foam-covered head and a spring clip, mounted on a thin black cable. It uses a condenser element of the electret capacitor type and picks up sound from all directions. The cable ends in a small gray cylindrical adapter with a 3.5 mm jack socket at one end and a USB 2.0 Type A plug at the other.
The microphone covers a frequency range of 50 Hz to 18 kHz, with a sensitivity of -30 dB ±3 dB (0 dB = 1 V/Pa at 1 kHz) and an impedance of 1 kOhm ±30% at 1 kHz. The signal to noise ratio is 74 dB. The cable is 2 m (6.6 ft) long.
It is intended for conference, computer, interview and recording use, and connects through a USB 2.0 Type A plug.
- Microphone Type
- Condenser (electret capacitor)
- Directionality
- Omnidirectional
- Frequency Range
- 50 Hz to 18 kHz
- Sensitivity
- -30 dB ±3 dB (0 dB = 1 V/Pa, 1 kHz)
- Impedance
- 1 kOhm ±30% at 1 kHz
- Signal to Noise Ratio
- 74 dB
- Cable Length
- 2 m (6.6 ft)
- Connector
- USB 2.0 Type A plug
- Adapter
- 3.5 mm jack socket to USB-A plug
- Intended Use
- Conference, computer, interview, recording
- Model
- AU UL20
- Mounting
- Spring clip
Questions and answers
- Does it work with USB-C laptops?
- Only through a USB-A port or a USB-A to USB-C adapter. The plug is USB 2.0 Type A, so a USB-C-only machine needs an adapter or hub.
- Do I need to install drivers?
- No. It is a USB audio device, so computers recognize it as an input without extra software.
- Can I use it for music?
- It is built for voice. The 50 Hz–18 kHz range and omnidirectional pattern suit speech, but instruments and singing will sound thin next to a large-diaphragm condenser.
- What is the 3.5 mm socket on the adapter for?
- It is a headphone jack on the adapter end, so you can monitor through the same connection.
- How long is the cable?
- 2 m, or about 6.6 ft, from the mic clip to the USB plug.
- Will it pick up background noise?
- Yes. The omnidirectional capsule hears the whole room, so fans, keyboards and nearby conversation come through. A cardioid mic rejects more of that.







