The Vatrer 48V (51.2V) 100Ah server rack battery stores 5120Wh of energy per unit. It uses EV-grade LiFePO4 cells rated for over 5000 charge cycles. This listing is a 4-pack. The battery stores solar energy during the day so it can power household loads such as lighting, routers and refrigerators after production stops.
A 100A Smart Battery Management System (BMS) protects against overcharging, overdischarging, overcurrent and short circuits. Low-temperature protection stops charging below 32°F and pauses discharging below -4°F. WiFi, Bluetooth and a built-in touch display provide monitoring. The WiFi module allows remote monitoring, setting changes, OTA firmware updates and management of multiple batteries.
The battery uses a standard server rack form factor and can be placed horizontally or mounted vertically in a rack. Up to 10 units can be connected in parallel, for a total of 51.2kWh. It can be charged with a 58.4V 20A LiFePO4 charger, from solar panels through an MPPT controller, or from a generator through a DC-DC charger. It suits home solar, RV, marine, off-grid cabin and mobile energy systems.
- Voltage
- 48V (51.2V)
- Capacity
- 100Ah, 5120Wh per battery
- Quantity
- 4-pack
- Cell type
- EV-grade LiFePO4
- Cycle life
- Over 5000 cycles
- BMS
- 100A Smart BMS with overcharge, overdischarge, overcurrent and short-circuit protection
- Low-temp protection
- Charging stops below 32°F; discharging pauses below -4°F
- Connectivity
- WiFi, Bluetooth, built-in touch display
- Firmware
- OTA updates via WiFi
- Expansion
- Up to 10 units in parallel, up to 51.2kWh
- Charging
- 58.4V 20A LiFePO4 charger (about 5 hours to full), solar via MPPT controller, generator via DC-DC charger
- Form factor
- Standard server rack
- Mounting
- Horizontal placement or vertical rack mounting
- Applications
- Home solar, RV, marine, off-grid cabins, mobile energy systems