Vega Bond Purplecoat is a single-component, closed-cell spray foam insulation. It applies as a continuous layer without the seams or gaps of fiberglass batts and rolls, which helps prevent thermal bridging. The foam expands on its own to fill uneven and hard-to-reach surfaces, and it forms an airtight seal on wood, brick, stone, concrete, metal, drywall, glass, MDF and OSB.
It can be used on roofs, facades, attics, ceilings and foundations. It can also be used on automobile bodies, trailers, RVs, sheds, boats, yachts, kayaks and vessels. The applicator gun has a swivel tip that gives a 30-degree spray angle. A red nozzle is for vertical surfaces and an orange nozzle is for ceilings and roofs.
Spray from 12 to 15 inches away. Apply to a clean, dry surface in controlled passes, and follow the manufacturer's thickness and curing guidance. Keep the foam out of direct sunlight, which can cause discoloration. Depending on the application, an approved thermal or ignition barrier may be required. Use the specified protective equipment and ventilation, and follow the safety data sheet and local building codes.
- Product type
- Single-component spray foam
- Foam structure
- Closed-cell
- Coverage
- Up to 20 board feet per can at 1-inch thickness
- R-value
- R-5.66 per inch
- Thermal conductivity
- 0.025 W/(m·K)
- Fire rating
- ASTM E84 Class A surface-burning classification (smoke development and flame spread)
- Spray distance
- 12–15 inches
- Nozzles
- Red for vertical surfaces, orange for overhead
- Spray angle
- 30 degrees with the swivel-tip applicator gun
- Surfaces