These are heavyweight vegetable-tanned sheets of full-grain cowhide, cut from a double shoulder. The leather is 9/10 oz, approximately 3.6–4.0 mm thick, which is heavier than the 4–6 oz leather commonly sold for general leathercraft. It has a natural finish and a smooth pasted flesh side, which gives a cleaner look where the back is visible.
The leather tools well when dampened. It takes carving, basket stamping, letter and logo stamping, and embossing. It also accepts dyes, stains, oils, conditioners and antique finishes, so the result can range from a natural look to a deeply colored piece.
The thickness helps the leather hold its shape. It suits belts and belt blanks, heavy-duty straps, knife sheaths, holsters, tool holders and other structured goods. Each panel is pre-cut. The listed size is the minimum usable rectangular area, so a panel may be slightly oversized or have an irregular natural outer edge.
- Material
- Full-grain cowhide, vegetable tanned
- Cut
- Double shoulder
- Weight
- 9/10 oz
- Thickness
- Approximately 3.6–4.0 mm
- Finish
- Natural
- Back
- Smooth pasted flesh side
- Sizes
- 6 × 6 in, 6 × 12 in, 8 × 12 in, 12 × 12 in, 12 × 24 in
- Sizing note
- Listed size is the minimum usable rectangular area
- Custom sizes
- Available on request
- In the box
- One pre-cut leather panel