Prices are checked against each store and labelled with when.
The VEVOR 3303 is a 13-inch benchtop thickness planer with a 15 Amp, 2000W motor and a three-knife cutter head spinning at 23,500 rpm. It offers two feed speeds and a 1.8-inch dust port for hooking up a vacuum. It suits home woodworkers and small shops planing wide boards, though it is a heavy hobby-grade machine rather than a production tool. Against rival 13-inch planers from DeWalt and Makita, it trades brand support and finish quality for a wider cutter head and dual speeds at the entry level.
In stockSold by VEVOR Distribution StoreReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
Owners rate it around 4.2 out of 5. They like the power and the wide cut for the class, and most complaints center on setup, snipe and knife alignment.
The VEVOR benchtop thickness planer surfaces wood with a three-knife cutter head on a 13 in infeed table. A 15 Amp, 2000W motor spins the cutter head at 23500 rpm and provides power for removing material from hard and soft woods. The infeed table is 12 in long and the planer takes boards up to 13 in wide.
The planer has dual speed control and a feed speed of 236 in/min. Maximum cutting depth is 1/8 in and maximum cutting thickness is 6 in. A handle that rotates 360 degrees controls the planer's height.
The knives are high-speed steel inserts, and a set of pins passes through machined holes in each knife for one-tool knife changes. A 1.8 in dust port adapter connects a vacuum cleaner hose to reduce debris discharge. Protection against short circuits and overload shuts the machine down, and it runs normally again after resetting.
It checks today's price at every store, compares the alternatives and answers in about a minute.