What is a cold cut chop saw?

It cuts metal with a toothed blade instead of an abrasive wheel. The blade shears the material, so the cut stays cool and needs little cleanup.

It is meant for steel and other metal stock such as tube, angle, bar and channel. The vise and fence hold the material for straight or miter cuts up to 45 degrees.

Does it really cut without sparks?

The cold-cut design produces far fewer sparks and much less heat than an abrasive saw. Some chips still come off, which is why the guard wraps the blade.

How does it compare with an abrasive chop saw?

It gives cleaner, cooler cuts with less grinding, but the blades cost more and need a steady feed. Abrasive saws are cheaper to run but leave burrs and heat.

Why does it need two buttons to start?

The soft start brings the motor up to speed gradually to protect it. Both buttons must be pressed together, which also keeps your hands away from the blade.

VEVOR Chop Saw, 14"/355mm Blade Diameter Cut Off Saw

Best price now

$279.90at WalmartChecked Nov 9

Prices are checked against each store and labelled with when.

Visit Walmart

VEVOR Chop Saw, 14"/355mm Blade Diameter Cut Off Saw

Best price now

$279.90at WalmartChecked Nov 9

Prices are checked against each store and labelled with when.

Visit Walmart

VEVOR discount codes →

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $279.90 at Walmart on Nov 9.

Our take on the VEVOR Chop Saw, 14"/355mm Blade Diameter Cut Off Saw

The VEVOR 14-inch chop saw is a dry cold-cut saw for metal, built around a stainless steel blade with ceramic alloy teeth. It claims to cut steel without the heat and sparks of an abrasive saw, so the cut edge needs less grinding. A vise with a coarse gripping surface holds stock, a wrapped guard drops over the blade, and the fence adjusts tool-free for miter cuts up to 45 degrees. It suits fabricators and shop users cutting tube, angle and bar who want cleaner edges than an abrasive chop saw gives. Against abrasive saws it trades lower spark and heat for a higher blade cost and a gentler feed rate.

Best forMetal fabricators cutting tube, angle and barShop users who want cleaner edges with less grindingCutting stock at miter angles up to 45 degreesBuyers moving up from an abrasive chop saw

Pros

Cold-cut blade leaves a smoother edge than abrasive wheels
Little heat build-up, so cut pieces can be handled sooner
Wrapped spark guard drops over the blade as the saw lifts
Vise with a coarse gripping surface holds stock firmly
Tool-free fence adjustment for miter cuts up to 45 degrees
Soft start eases the motor on and limits startup jolt

Cons

Cold-cut blades cost more than abrasive wheels and can chip if fed too fast
Smaller cutting capacity than many abrasive saws of the same blade size
Two-button start adds a step to every cut
Heavier and bulkier than a basic abrasive chop saw

VEVOR Chop Saw, 14"/355mm Blade Diameter Cut Off Saw prices at every store

WalmartNew
In stockSold by VEVOR Distribution StoreReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
$279.90Free shippingChecked Nov 9
Visit Walmart

About the VEVOR Chop Saw, 14"/355mm Blade Diameter Cut Off Saw

This 14-inch (355 mm) cold cut chop saw is made for cutting metal. It uses a stainless steel saw blade and a ceramic alloy cutter head. Cutting is dry, with no heat build-up and no extra sparks, so the material can be touched right after a cut.

The vise has a large-grain design for non-slip clamping on a range of materials. A fully wrapped spark guard drops down around the blade when the saw is lifted and helps catch and deflect debris. The fence pivots from 0 to 45 degrees for miter cuts without flipping heavy material, and it adjusts without tools for different material sizes.

A soft start protects the motor. To start the saw, press two buttons at the same time. The clamping and blade are turned and ground to fit closely, which reduces vibration.

Model: J1G-ZB-355G-3
Voltage: AC 120 V, 60 Hz
Rated power: 2800 W
No-load speed: 1200 rpm
Blade diameter: 14 in / 35.5 cm
Blade: Stainless steel saw blade with ceramic alloy cutter head
Fence angle: 0-45 degrees, pivoting, toolless adjustment
Dimensions: 18.62 x 12.59 x 28.54 in / 47.3 x 32 x 72.5 cm
Net weight: 51 lbs / 23.2 kg
Safety: Fully wrapped spark guard, soft start, two-button start
In the box: 1 x chop saw, 2 x wrenches, 1 x pair of carbon brushes, 1 x instruction manual

Specifications

size: 14"Source

Questions and answers

What is a cold cut chop saw?: It cuts metal with a toothed blade instead of an abrasive wheel. The blade shears the material, so the cut stays cool and needs little cleanup.
What can it cut?: It is meant for steel and other metal stock such as tube, angle, bar and channel. The vise and fence hold the material for straight or miter cuts up to 45 degrees.
Does it really cut without sparks?: The cold-cut design produces far fewer sparks and much less heat than an abrasive saw. Some chips still come off, which is why the guard wraps the blade.
How does it compare with an abrasive chop saw?: It gives cleaner, cooler cuts with less grinding, but the blades cost more and need a steady feed. Abrasive saws are cheaper to run but leave burrs and heat.
Why does it need two buttons to start?: The soft start brings the motor up to speed gradually to protect it. Both buttons must be pressed together, which also keeps your hands away from the blade.
Where is the VEVOR Chop Saw, 14"/355mm Blade Diameter Cut Off Saw cheapest?: At Walmart, for $279.90, as of our latest check.

More from VEVOR

VEVOR Motorcycle Helmet, Full Face, Adult Motocross Dirt Bike Helmet with Tinted and Clear Dual Visor, Motorbike Racing Street with Detachable Liner for Men & Women, DOT Approved