How is a cold cut saw different from an abrasive chop saw?

A cold cut saw uses a toothed cermet blade that mills through metal, so cuts stay cool and edges come out clean with little burr or heat discoloration. An abrasive saw grinds through with a disc, throwing sparks and leaving hardened, rougher edges.

What materials can it cut?

It handles angle iron, round bar, square tubing, I-beams, channel steel and aluminum profiles. The -45° to 45° miter lets you cut those at angles.

Does it need a special blade?

Yes. It ships with a 14-inch, 66-tooth cermet-tipped blade, and replacements must be the same toothed cold cut type. Abrasive discs are not meant for this saw.

Is it portable enough for job sites?

It is a corded bench saw with a carbon steel base, so it is best set up on a fixed bench or truck bed. Moving it around is possible but not as easy as a smaller abrasive saw.

What is the soft-start for?

Soft-start ramps the motor up gradually instead of slamming on at full torque, which reduces stress on the motor and makes startup steadier.

VEVOR Chop Saw 14-inch Cold Cut Blade 2800 W Powerful Motor Cut Off Saw

Best price now

$243.90at WalmartChecked Nov 9

Prices are checked against each store and labelled with when.

Visit Walmart

VEVOR Chop Saw 14-inch Cold Cut Blade 2800 W Powerful Motor Cut Off Saw

Best price now

$243.90at WalmartChecked Nov 9

Prices are checked against each store and labelled with when.

Visit Walmart

VEVOR discount codes →

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $243.90 at Walmart on Nov 9.

Our take on the VEVOR Chop Saw 14-inch Cold Cut Blade 2800 W Powerful Motor Cut Off Saw

The VEVOR 355G-3L is a corded 14-inch cold cut chop saw with a 2800 W brushed motor and a 66-tooth cermet-tipped blade that turns at 1,100 RPM no-load. Unlike abrasive chop saws that burn and harden the cut edge, a toothed cold cut blade leaves cleaner, cooler cuts in angle iron, round bar, square tubing, I-beams, channel and aluminum profiles. The head miters from -45° to 45°, and a fast-lock vise, chip collector, reinforced blade guard and soft-start round out the package. It suits fabricators and shop users who cut metal regularly and want cleaner edges than an abrasive saw gives, though it is a heavy corded bench tool rather than a portable one.

Best forMetal fabrication shops cutting tubing and bar dailyConstruction and welding crews needing clean, cool cutsAutomotive and repair work on exhaust and chassis stockDIYers with a fixed bench who cut angle iron and profiles

Pros

Cermet-tipped 66-tooth blade cuts cool and clean, with less burr and heat discoloration than abrasive saws
2800 W motor and 1,100 RPM no-load speed handle thick stock and repetitive cuts
-45° to 45° miter adjustment covers angled cuts on tubing and bar
Fast-lock vise holds workpieces securely for quick repeat cuts
Chip collector and reinforced blade guard contain debris and flying chips
Soft-start reduces motor stress and kick on startup

Cons

Brushed motor needs brush attention over time and is louder and less efficient than brushless rivals
Corded, heavy bench saw with no battery option, so it stays in the shop
Replacement cermet blades cost more than abrasive discs
Chip collector needs emptying often during long sessions
No laser or work light to help line up cuts

VEVOR Chop Saw 14-inch Cold Cut Blade 2800 W Powerful Motor Cut Off Saw prices at every store

WalmartNew
In stockSold by VEVOR Distribution StoreReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
$243.90Free shippingChecked Nov 9
Visit Walmart

About the VEVOR Chop Saw 14-inch Cold Cut Blade 2800 W Powerful Motor Cut Off Saw

This corded 14-inch cold cut chop saw has a 2800W brushed motor with a no-load speed of 1,100 RPM. It uses a 14-inch, 66-tooth cermet-tipped blade for clean dry cuts in metal. The miter adjusts from -45° to 45°.

It cuts angle iron, round bar, square tubing, I-beams, channel steel and aluminum profiles. A fast-lock device holds the workpiece in place. A D-shaped non-slip handle gives control on the downward cut.

The saw has a reinforced blade guard to block flying chips, large ventilation openings for cooling, and a reinforced fence for workpiece support. The base is carbon steel, and a soft-start system reduces motor stress. A chip collector contains metal chips and empties easily.

Model: 355G-3L
Type: Corded cold cut chop saw
Blade: 14 in, 66-tooth, cermet-tipped
Motor: Brushed, 2800W rated power
No-load speed: 1,100 RPM
Miter range: -45° to 45°
Power supply: AC240V, 60Hz (US) / AC230V, 50Hz (EU)
Material: Carbon steel exterior
Net weight: 44.86 lbs / 20.35 kg
Cuts: Angle iron, round bar, square tubing, I-beams, channel steel, aluminum profiles
In the box: 1 chop saw, 1 hex wrench, 1 star knob, 1 pair replacement carbon brushes, 1 chip collector, 1 user manual

Specifications

size: 14"Source

Questions and answers

How is a cold cut saw different from an abrasive chop saw?: A cold cut saw uses a toothed cermet blade that mills through metal, so cuts stay cool and edges come out clean with little burr or heat discoloration. An abrasive saw grinds through with a disc, throwing sparks and leaving hardened, rougher edges.
What materials can it cut?: It handles angle iron, round bar, square tubing, I-beams, channel steel and aluminum profiles. The -45° to 45° miter lets you cut those at angles.
Does it need a special blade?: Yes. It ships with a 14-inch, 66-tooth cermet-tipped blade, and replacements must be the same toothed cold cut type. Abrasive discs are not meant for this saw.
Is it portable enough for job sites?: It is a corded bench saw with a carbon steel base, so it is best set up on a fixed bench or truck bed. Moving it around is possible but not as easy as a smaller abrasive saw.
What is the soft-start for?: Soft-start ramps the motor up gradually instead of slamming on at full torque, which reduces stress on the motor and makes startup steadier.
Where is the VEVOR Chop Saw 14-inch Cold Cut Blade 2800 W Powerful Motor Cut Off Saw cheapest?: At Walmart, for $243.90, as of our latest check.