Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The Victron Smart NG is a 12.8V 200Ah lithium iron phosphate (LiFePO4) battery with an integrated shunt that reports voltage, current and temperature to a Victron BMS. It is built for solar, off-grid, RV, marine and industrial systems that need deep-cycle storage with smart monitoring. Unlike drop-in lithium batteries with a built-in BMS, it has no internal protection and must be paired with a Victron smallBMS NG or Lynx Smart BMS NG, so it suits installers already in the Victron ecosystem rather than casual buyers. Owners value the accurate state-of-charge data and long cycle life; the main complaints are the extra BMS cost and the setup work.
In stockShips from Canada · duties may apply
Lowest price we've seen: $549.60 on Nov 12 at CraftsCove Marine. Tracked across 1 store since Nov 12.
Owners of Victron lithium systems praise the accurate shunt data and reliable deep-cycle performance. Most criticism centers on the mandatory BMS and the extra cost and wiring it adds.
The Victron 12V (12.8V) 200Ah Smart NG is a Lithium Iron Phosphate (LiFePO4 or LFP) battery for solar and off-grid systems, RVs, caravans, tiny homes, marine setups, industrial power systems and backup power for residential or commercial buildings. It must be used with a compatible battery management system (BMS): the smallBMS NG for small systems that won't use a Victron inverter/charger, or the Lynx Smart BMS 500A NG M10 or Lynx Smart BMS 1000A NG M10 for all other systems.
An integrated shunt sends voltage, current and temperature data to the Lynx Smart BMS, which uses it to calculate the state of charge. You can view and control battery parameters in the VictronConnect app over Bluetooth or in the VRM Portal. Linking the battery to a GX device such as a Cerbo GX or Ekrano GX shows cell voltage, battery current and temperature in real time. Firmware is updated automatically through the BMS.
The battery can be connected in series, parallel or series/parallel to raise system voltage up to 48V, with up to 50 batteries in one system. Several Lynx Smart BMS units can be connected in one installation for more capacity, higher discharge currents and added redundancy. The battery has an ingress protection rating against dust and low-pressure water jets, and mounting brackets for installation.
